Lab Challenge 1 – Switch Config
In this lab you will config 4 switches which are interconnected with each other.
In our simulator, you can only use “?’ with a space before for seeing the next keywords (for example: “spanning ?”, not “spanning?”). The simulator can be accessed via this link: http://www.rstut.com/final_flash/Four_Switches_Lab_1/Four_Switches_Lab_1.html.
Please let us know if you like this simulator or not so that we can continue making other simulators in the future. Any suggestion, recommendation, error reports are warmly welcomed!
We are still working to add more Lab Challenges like this. If you have any challenges, commands or suggestions please comment here or send an email to support@rstut.com. Every contribution is warmly welcome!
Statement 12 is being marked incorrect and the command requested is : “switchport trunk encapsulation dot1q”
Statment 12
switchport nonegotiate
Hugs
Its relay good one.
Thanks
Very good way to test and practise
Nice,
Took a few tries to figure out that it only checks up to the first error. It would be nice if it could check all the answers at once so that one can immediately see which ones they got wrong.
Not sure how to use the “?” yet.
@Anonymous: Thanks for your suggestion. You can only use the “?” after “space” to see the next options.
Having a problem with statements 11 & 12 as they are both should be configured as “switchport nonegotiate” command and it is not taking it.
ok for statement 11: switchport mode trunk” and statement 12 “switchport nonegotiate” I don’t know why, but if anyone has an explanation, please share it.
thanks
@Shadi: Requirement 9 has two parts:
1) Configure a dot1q trunk between Sw2 & Sw4 using Fa0/19 interfaces.
2) These ports should not use DTP to negotiate a trunk
So we need two commands.
question 2 – why don’t these work?
spanning-tree vlan 10 priority 0
spanning-tree vlan 10 priority 4096
spanning-tree vlan 10 root primary
spanning-tree vlan 10 root secondary
What is the answer?
@networker: These statements are correct:
spanning-tree vlan 10 root primary
spanning-tree vlan 10 root secondary
This question is missing the requirement “without using priority keyword”. Thanks for your information, we have just updated Q.2.
its really good !!
This is the best way to learn things!!
Q3 –
what port path cost should be implemented?
command should be: “spanning-tree vlan 10 cost xx”
0? 1? 100?
@ccna: The command “spanning-tree vlan 10 cost xx” can only be used under interface mode. Also that command cannot guarantee Sw1 to be the root bridge.
can any one pls send me the answer for all the question.. thanks
it’s amazinnnnnnnnnnnnnnnng
please make more like this .. it’s fun to solve and good review to our information ..
you are keep getting better and better .. you are the best
thanksssssssssssssssssssssss
this is excellent, keep doing stuff like this folks.
this is best online practice lab stuff I ve ever seen … I am amazied.
thanks a lot.
Here are answers except for Question 4 –
Answer 1: spanning-tree mode rapid-pvst
Answer 2: spanning-tree vlan 10 root primary
Answer 3: spanning-tree vlan 10 root secondary
Answer 4: ?????
Answer 5: spanning-tree portfast
Answer 6: channel-group 1 mode on
Answer 7: switchport trunk encapsulation dot1q
Answer 8: switchport mode trunk
Answer 9: switchport mode dynamic auto
Answer 10: switchport mode dynamic desirable
Answer 11: switchport mode trunk
Answer 12: switchport nonegotiate
Question 4
can we user SPANNING-TREE ROOTGUARD
???
got answer for Q4
spanning-tree guard root
@Om, @sunilks: Nice, congrats to solve all the requirement! We are going to upload Challenge 2!
Please post more labs then we can save money and appreciated for your hard work.
Hello guys!
First of all I want to thank you for this nice simulator!
In question nr. 9 is mistake…the question is:
“Configure a dot1q trunk between SW2 and SW4 using interface F0/21; these ports should not use DTP to negotiate a Trunk.”
The problem is that there is no connection via F0/21 between SW2 and SW4. It is only “cosmetic” issue but please correct this question. Thanks.
Have a nice day.
@kuprezak: Thanks for your detection! We have just fixed it!
Great lab!!! I loved it!!!
4- spanning-tree guard root
Great job !!!
Gratz for that, is very usefull.
Thanks
love this sim, pls make more
4. spanning-tree portfast
Very nice sim…..thank you!
spanning-tree guard root
statement1：spanning-tree mode rapid-pvst
statement2：spanning-tree vlan 10 root primary
statement3:spanning-tree vlan 10 root secondary
statement4:spanning-tree guard root
statement5:spanning-tree portfast
statement6:channel-group 1 mode on
statement7:switchport trunk encapsulation dot1q
statement8:switchport mode trunk
statement9:switchport mode dynamic auto
statement10:switchport mode dynamic desirable
statement11:switchport mode trunk
statement12:switchport nonegotiate
It is very useful for the practice. Thanks all of the Engineers for there In Puts.
Thank you for the simulator. I had to work harder than I ‘d like to admit to figure it out! LOL
One correction, Question 5 references interfaces fa0/23 and fa0/24 but then specifies fa0/19 and fa0/20 in the range command. I believe this needs to be corrected.
@stringbender: Thanks for your detection. We have just updated it!
Very good job. Excellent for practice test!
Thanks guys
Awesome efforts, Hats off!!!!!!!!!!!!
Wonderful job. if there is a way to do it with Gns3
please, lets put on all sections ,even routing ( routers ) , wonderful site
What’s Switch that Use for what? Use Cisco or Enterprise or shop Company
plz send to aslam.paikkarathodi@railwire.co.in about the Training in real time networking of Switches by figures
this is great!! thank you 🙂
This is a great lab, thank you all for putting this together. Much appreciated
…………………Nice One………………….Thank You Very Much……………………………..
1.spanning-tree mode rapid-pvst
2.spanning-tree vlan 10 root primary
3.spanning-tree vlan 10 root Secondary
4.spanning-tree guard root
5.spanning-tree portfast
6.channel-group 1 mode on
7.switchport trunk encapsulation dot1q
8.switchport mode trunk
9.switchport mode dynamic auto
10.switchport mode dynamic desirable
11.switchport mode trunk
12.switchport nonegotiate.
All statements are correct! Congratulations!
I love you guys
Question No – 04.
In this question its says its connecting for a router. It should be a end devices rt ? we configure portfast to a end devices. (pc-host) ?
Thank you, guys. You are doing awesome job!!!
(4) : spanning-tree guard root
Very excellent simulator.Please post so much more!!!!
Thanks a million
hi everyone im preparing for switch exam in sha allah i’m going to sit the exam next week make dua in sha allah
1#spanning-tree mode rapid-pvst
2#spanning-tree vlan 10 root primary
3#spanning-tree vlan 10 root secondary
4#spanning-tree guard root
5#spanning-tree portfast
6#channel-group 1 mode on
7#switchport trunk encapsulation dot1q
8#switchport mode trunk
9#switchport mode dynamic auto
10#switchport mode dynamic desirable
11#switchport mode trunk
12#switchport nonegotiate