Share your CCIE v5 Written Experience

I tried it before and i still have it, their updates delays more than the other practice test questions that we use.

I didn’t know IP source guard was only for L2, so Spoto is correct there.

“IP source guard provides source IP address filtering on a Layer 2 port to prevent a malicious host .”

source:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SY/configuration/guide/sy_swcg/ip_source_guard.pdf

Passed today with 900+ Spoto is still valid…. There are some incorrect answers and also misleading cisco questions…

There is a new drag and drop about the multicast address and timers from rip, eigrp and ospf… Now going to study for the lab…

Used INE, Spoto 133, Cisco Guides, CCIE R&S 5.0 OFFICIAL book.

In Spoto there is a weird Drag and Drop question, with only half the question (no 2nd column to drag to), what could it be, what are the buckets to drag them onto ?

– IPv6 prefix assigned by an organization
– supports application layer gateway
– supports ipv6 prefix 64:ff9b::/96
– translates 2001:1::/64 to 2001:2::/64

Since the order could be different, the above is completely useless without the actual buckets to chose from and drop them onto.

Does anyone know ?

can you please share spoto 133 please.

chinedu at duntro dot com

@ Chucky,

Congrats buddy, can you please share the shijut24 @ gmail.com Much appreciated and thanks in advance my friend…

What is the PHB class on this flow ?
http://imgur.com/a/DRcK4
The watermarks hide most of the text, I cannot find anything indicating QoS-related info.

a) EF
b) none
c) AF21
d) CS4

Any idea why CS4?
Is that “ToS” we see half-hidden with “80” underneath, since 0x80 ?
It sounds right, but the question was tricky. I wouldn’t remember CS4=TOS128=0x80

Good to know:

For RIP, the passive-inter-face command will prevent the inter-face from sending out routing updates but will allow the interface to receive updates.

@Chucky I don’t need that

I past today, had 8XX, all questions are from PL and 119, you dont need to pay any crazy amount to spoto. Just learn and also research on cisco and you will be good for the exams. Wish you all good luck

Can you please share spoto 133q urgently?
attarhmn@ ya hoo.com

Can please share spoto 133q urgently?
attarhmn@ ya hoo.com

@Soul
>In Spoto there is a weird Drag and Drop question, with only half the question (no 2nd column to drag to), what could it be, what are the buckets to drag them onto ?

If you share all questions of SPOTO 133Q, I will resolve your question.

maybe guys can resolve all spoto quetions .
firstly ,u need get spoto dumps
so have a good day .
http://cciers.spoto.net

Dear Respected RSTUT members,

We are 591LAB- a Chinese Int’l vendor, locally known here as “SPOTO”. We are proud to announce that BOTH our CCIE RS Written (Exam# 400-101) and LAB are consistently passing.

For Written information please visit: http://www.591lab.com/single-post/2017/04/07/CCIE-RS-Written—stable-pass
For Lab information, please visit : http://www.591lab.com/single-post/2017/01/21/CCIE-RS-Lab–x2-Passes

Download the latest LAB feedback from the above link resources.

Hope you have a great day! Looking forward hearing from you soon!

We are 591LAB- a Chinese Int’l vendor, locally known here as “SPOTO”. We are proud to announce that BOTH our CCIE RS Written (Exam# 400-101) and LAB are consistently passing.

For Written information please visit: http://www.591lab.com/single-post/2017/04/07/CCIE-RS-Written—stable-pass
For Lab information, please visit : http://www.591lab.com/single-post/2017/01/21/CCIE-RS-Lab–x2-Passes

Download the latest LAB feedback from the above link resources.

Hope you have a great day! Looking forward hearing from you soon!

Hi all,
I’d like to know something if 591Lab is also known as SPOTO.
Thanks

@Majesty : no, the Spoto have www.spoto.net on it, despite what 591lab might claim.

@AK:

Hi AK. Thanks for your link for spoto dump, but it unfortunately does not work.
Could you please upload that file in another place?

Those who wish to “SPOTO 133Q DUMP” should add their own mail address under the following mailing list and should post.
If you saw this post and you have “SPOTO 133Q DUMP”, please share it.
Thank you.
Compliance with the notation rules.(xxxxx @ yyyyy)
h1740mm @ gmail.com
shijut24 @ gmail.com
satya.maruth @ gmail.com
orowp1 @gmail.com
kamalrajshan @ gmail com
chriswarfreak050697 @ gmail.com
adjustmss @ gmail.com
bahador_gheisari @ yahoo.com
peter_mak @ yahoo.com
tutrij @ gmail.com
empno2000 @ yahoo.com
sanpay1984 @ gmail.com
smartfix123 @ gmail.com
dorocoll77 @ gmail.com
trullybonga @ yahoo.com
tonykozier44567 @ gmail.com
charles.white64 @ gmx.com
mmacbe79 @ gmail.com
beulsins_sonny@yahoo. fr
ayagaya88 @ gmail.com
chat2rajkumar@ rediffmail.com
F77777f_2004 @hotmail.com
jradnor93 @ gmail.com
mandirooz33 @ yahoo.com
alfredyyyy8 @ gmail.com
deskbucks @ gmail.com
arabicuser @ hotmail.com
idealgur2 @ gmail.com
nguyentan1980 @ gmail.com
hrt7778 @ yahoo.com

@Soul
I checked that it’s true 591Lab is Spoto international version

Please share spoto 120 or 130
mm 78ccie2017 AT gmail.com

@ all

guys in the spoto drag N drops, does the blank ‘fields’ shuffle or stay the same.

@all
guys in spoto drag and drops. does the blank fields shuffle in actual exam or stay the same as practice exam D&D

Guys, I have taken exam few days back. Passed the exam. I used PCL.

Guys,

I passed the exam . Used PCL for preparation.

Hello guys with PCL? The PCL 119?

Used this PCL for the test.

https://mega.nz/#!IGJmQbLL!uVi20wIKeoGL7ryT8VqKt8gHvyx4SRdgP3DeYPM2qTs

@Anonymous

Looks like several of the answers are either incorrect, or the others are. 🙁

I have passed today, Spoto is valid, also the PL 119 are the same like Spoto so both are valid.

@Inside-Out Congrats but there are differences in the answers between spoto and PCL 119…Do they give you enough to pass by a comfortable margin?

spoto is enough to pass given if u study real real hard.

@truefalls did you take exam, yet? which version spoto, 120Q or 133Q? There are several other files out there too, all of which have several conflicting answers.

Which feature must be enabled so that an IS-IS single topology can support IPv6 traffic?

A extended metrics
B adjacency checking
C new-style TLVs only
D both new-and old-style TLVs
E old-style TLVs only

I think that D is correct.
The metric-style wide command is generate and accept only new style TLV.
IS-IS single topology supports both old style TLV and new style TLV.
In other words, in the same topology, if there is a router that accepts only the new style TLV and a router that generate the old style TLV, it will be a issue.
Therefore, I think that it is necessary to enable both the new style TLV and the old style TLV.

How do you think about this?

Which two statements about MPLS label stack encoding are true?(Choose two)

A MPLS label are encoded in little-endian format.
B When an MPLS label stack under goes the swap operation, it swaps the top and bottom labels.
C When a device forwards a labeled packet, it must copy the TTL of the incoming label to the outgoing label.
D The TTL is significant only on the top label.
E When a device forwards a labeled packet, it must copy the TTL of the outgoing label to the top label.

PCL’s answer is CD.
I investigated about this, but I could not find the basis of the answer.

Someone please advise me.

anybody how many question in exam

@Inside-Out

Did you encountered new questions such as one DnDs about Radius vs TACACS and an IPV6 one ???

which two actions can you take to prevent routes from becoming stuck in active ?

A-Manually increse the EIGRP metrics on in interfaces connected to successors.
B-Increase the EIGRP K values on low-bandwidth interfcaes.
C-Increase the time a router waits before it declares routes stuck in active.
D-Design the network so that it uses the lowest possible numbers of queriess.
E.Use port chnneling to aggregate multiple EIGRP interfcaes.
F-Increase the Hello timers on EIGRP interfcaes.

is D E ???

which two actions can you take to prevent routes from becoming stuck in active ?

A-Manually increse the EIGRP metrics on in interfaces connected to successors.
B-Increase the EIGRP K values on low-bandwidth interfcaes.
C-Increase the time a router waits before it declares routes stuck in active.
D-Design the network so that it uses the lowest possible numbers of queriess.
E.Use port chnneling to aggregate multiple EIGRP interfcaes.
F-Increase the Hello timers on EIGRP interfcaes.

is D E ???

which two actions can you take to prevent routes from becoming stuck in active ?

A-Manually increase the EIGRP metrics on in interfaces connected to successors.
B-Increase the EIGRP K values on low-bandwidth interfaces.
C-Increase the time a router waits before it declares routes stuck in active.
D-Design the network so that it uses the lowest possible numbers of queries.
E.Use port channeling to aggregate multiple EIGRP interfaces.
F-Increase the Hello timers on EIGRP interfaces.

is D E ???

which two actions can you take to prevent routes from becoming stuck in active ?

A-Manually increse the EIGRP metrics on in interfaces connected to successors.
B-Increase the EIGRP K values on low-bandwidth interfcaes.
C-Increase the time a router waits before it declares routes stuck in active.
D-Design the network so that it uses the lowest possible numbers of queriess.
E.Use port chnneling to aggregate multiple EIGRP interfcaes.
F-Increase the Hello timers on EIGRP interfcaes.

DE ???

Which two statements about IS-IS authentication are true? (Choose two.)
A. Level 2 LSPs transmit the password encrypted inside the IS-IS PDU.
B. Area and domain authentication must be configured together.
C. Passwords can be configured on a per-interface basis.
D. If LSP authentication is in use, unauthorized devices can form neighbor adiacencies.
E. Lever 1 LSPs use the domain password.
Answer: AD ?! D no, maybe C

Today 30 April 2017 I have passed with score between 900 and 920.

Spoto 133 questions are valid but the answers need to be checked as mentioned in this forum.

It came to me new DnD question which is for RADIUS vs TACACS+

Also, there are two new questions 1st for IS-IS type of topology which should be used for traffic to insure same network path.

2nd Question for IGMPv2 for destination address for leave froup message the answer is 224.0.0.2

Thanks for Help and wish you all the Best

Which feature must be enabled so that an IS-IS single topology can support IPv6 traffic?

A extended metrics
B adjacency checking
C new-style TLVs only
D both new-and old-style TLVs
E old-style TLVs only

I think that D is correct.
The metric-style wide command is generate and accept only new style TLV.
IS-IS single topology supports both old style TLV and new style TLV.
In other words, in the same topology, if there is a router that accepts only the new style TLV and a router that generate the old style TLV, it will be a issue.
Therefore, I think that it is necessary to enable both the new style TLV and the old style TLV.

How do you think about this?

@Fahad
Congrat bro…!!!
can you write DnD question and answer about RADIUS vs TACACS+???
Thanks

Today I have passed with score between 900 and 920.

Spoto 133 Questions still valid but you have to consider the answers which already mentioned in previous posts.

As I remember for me I face 3 new questions as below:

1st DnD 8 options the differences between RADUIS vs TACACS+

2nd IS-IS topology type that can/insure use network traffic with same path to the destination.

3rd IGMPv2 use which destination address for leave group message ==> answer is 224.0.0.2

I would like to thank you for your help and support and wish you all the best

18：Which feature can you implement to most efficiently protect customer traffic in a rate-limited
WAN Ethernet service ？
A. IntServ with RSVP
B. DiffServ
C. Q-in-Q
D. The IPsec VTI qos pre-classify command
E. HCBWFQ

B is wrong , THE right is E

@Fahad

can u share your dump plaese .

Find it as below:

RADIUS:
– uses UDP
– encrypts just the password
– Open Standard
– Combines authentication (device) and Authorization(User).

TACACS+:
– uses TCP
– encrypts the entire authentication process
– proprietary to Cisco
– Separates Authentication, Authorization, and Accountability

okaenrique @ yahoo.com Please share