Share your CCIE v5 Written Experience

@ Brando

People are definitely confirming that PL270 + Spoto is enough to pass and are still valid as of yesterday. Someone had passed with a 920 and sent me a pic to prove it.

-CCIE Kam

Refer to the exhibit.Which two statements about the given NetFlow configuration are
true?(Choose two)
A. It supports both IPv4 and IPv6 flows.
B. It uses the default port to send flows to the exporter.
C. It supports only IPv6 flows.
D. It supports only IPv4 flows.
E. It supports a maximum of 2048 entres.

Answer should be AB in my view after reading cisco material and googling this question .
But not confirm .

In the exibit the version is 5 and IPv6 requires version 9 , I am D is is correct, bit confusion between
B and E.

Guys anyone please share a link for .pdf to .vce converter.

Thanks in advance.

i urgently need CCIE dumps from spoto
please send them to me if someone is kind enough to help me
ahsanalicha @ hotmail . com

Refer to the exhibit. If router R1 sends traffic marked with IP precedence 3 to R2’s Loopback 0 address. Which class would the traffic match on R2’s Gi1/0 interface?
A . CM-CLASS-3
B . CM-CLASS-2
C . CM-CLASS-1
D . class-default
B OR D ??

D.

I’ve been told this is (D) however i don’t understand it. If anyone has a reference link that would be awesome.

-CCIE Kam

Hi,
I like the interaction in this thread, it reminds me how I always study.
Could you please send Spoto and PL270 to me ? souliouz at hotmail

Many thanks

@ Richard .. Congrats … will you pls share the spoto 120Q in this forum so everyone can benefit from it …

@Richard – Congrats!! Good Luck on the Lab portion, i hear it is the toughest

Thanks for sharing your experience.

-CCIE Kam

plz, can any one share spoto 120q ? deskbucks (at) gmail. com

please add my email address for spoto the email address is forsharingmaterial @ gmail.com

which one should i prepare 270 Questions or 120 Questions guys kindly guide me

Please send spoto 120q and 270 to {email not allowed}

SA,

When I had the exam, i do not remember to have any question from pl270 that does not have in spoto… So any question in pl270 on my exam, was the same that have in spoto.

spoto is best.
they update latest report and pass exam everyday
http://cciers.spoto.net

Charley thank you for your advice,really thankful to you

looks like PL updated their materials, I am seeing it now that there question are now 270 + 119. It was recently updated, I think yesterday 25th of April.

Please send Pl 270 and spoto dumps to dangles454 @ yahoo.com

@BRANDO

YOU HAVE NEW UPDATED QUES.PLZ SHARE shivpooja1 @ yahoo . com

@Charlie @CCIE KAM

Could you help me with this one, I’m confused between extended access lists or reflexive access lists.
Which type of access list allows granular session filtering for upper-level protocol?

@Pooja, I havent purchased yet… once I bought it, I will share it to the group… 🙂

Hi

@Myanmar Man
I am new to this forum. Please advise which file is valid, 270q or 119q for 400-101 that you have shared.
Kindly reply…

@AT
spoto Dumps 133 is valid
u can view their latest report on their website
http://cciers.spoto.net/en/index.html#Latest

@Myanmar Man thanks, you are the man 🙂

Is any one can share 400-101 latest valid dumps, please.
Urgently needed. Thanks

Can you please share 400-101 latest valid dumps?
Thanks

there are some people consider spoto dumps has wrong ,but guys can view spoto website.
why can spoto update report everyday.
guys can visist below:
http://cciers.spoto.net/en/index.html#Latest

Refer to the exhibit.R1 is unable to ping the device at 10.3.3.3.Which two
options are possible reasons for the problem?(Choose two.)
A.The static route is configured as a host route.
B.The static route points to a broadcast interface without a next-hop.
C.IP CEF is disabled on the local router.
D.Proxy ARP is disabled on the next-hop router.
E.The dynamic routing protocol configuration is missing.
F.IP CEF is disabled on the remote router.
Answer:BD or DE
for your kind support

BD is valid, because in Exhibit, we can see static route is pointing to fast ethernet which is a broadcast network and in broadcast network we should be providing next hop address instead of providing exist interface

@CCIE*SP

A:
v9 Template Based, available (as of 2009) on some recent routers. Mostly used to report flows like IPv6, MPLS, or even plain IPv4 with BGP nexthop.
B:
NetFlow records are traditionally exported using User Datagram Protocol (UDP) and collected using a NetFlow collector. The IP address of the NetFlow collector and the destination UDP port must be configured on the sending router.
C:
V9 IPV4+IPV6 or V5 only IPV4
D:
v5 Most common version, available (as of 2009) on many routers from different brands, but restricted to IPv4 flows.
E:
ip flow-cache entries
Specifies the maximum number of packet entries allowed in the Netflow cache before Netflow packets are created and sent to the collector. Valid values are 1 through 64 which configure increments of 1024 (1K) from 1024 to 65536 (64K). Default: 32 (32K)

https://en.wikipedia.org/wiki/NetFlow

http://etutorials.org/Networking/network+management/Part+II+Implementations+on+the+Cisco+Devices/Chapter+7.+NetFlow/Fundamentals+of+NetFlow/

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-netflow/prod_white_paper0900aecd80406232.html

Refer to the exhibit. If the default-information originate always command is configured on R4, what route type is assigned to the default route in R1’s route table?

A. O
B. E2
C. O IA
D. E1
b or c

AK thanks

The command can set the metric and metric type directly, with OSPF defaulting to cost 1 and type E2.
that’s why I think B is the correct

@Richard , there is a 119 file shared on this forum from passccielab, it is the same with spoto 120?

Wow ! Passleader has added 119 Qs
(270 + 119) Q&As Updated: Apr 25, 2017

hello, plz tell me any body about that, can i take ccip exm though i exm validity is expire.

Surely passleader have got the questions from this forum, guys spoto is valid… It is expensive but its worth it… CCIE is not a cheap certificatication… Wirtten 450$ + Lab 1700$.

@Tasneem
If the default-information originate always command is configured … what route type is assigned to the default route

O*E2 0.0.0.0/0 [110/1]

Which feature must be enabled so that ISIS single topology can support IPv6 traffic?

A . extended metrics
B. adjacency checking
C. new-style TLVs only
D. both new and old style TLVs
E. old style TLVs only

Both A & D seem correct. Which one is more correct?

Passed CCIE Written today, with a score of close to 90%.
Spoto 120 is more that enough but that pdf that was posted here earlier has a lot of mistakes when you compare it with SPotto. Be careful

@Unknown.

Actually the file posted earlier, have some corrections compared with spoto 120q…

@ Unknown, can you confirm if the questions from Spotp 120 are also there at PL270 ? JUst wanted to make sure if there is/are difference between those dumps. Thank u

HI EVERYONE,

ANYONE HAS VCE PLAYER FREE LATEST VERSION ????

@Brando,

Not every question from spoto are included on the PL270, I have used spoto and corrected some questions… you can see now PL have updated it, surely they got the questions from here.

@Unknown

Please share Spoto !!!!

@POOJA
http://itexamquiz.com/VCEPlayer.zip

@Charley

You can make a PDF file with Spoto and corrected questions please !!!
I don’t understand how people are so bad here !!!

@Unknown
would appreciate if could share SPOTO 120q with corrected answer, please.

@Weston,

I already did this on the previously post, for the rest of the question you can follow the file 109q posted here earlier.