Share your CCIE v5 Written Experience

Hi dear,
Hope you’re doing well
Can someone send me the CCIE written document for study. thanks
smohamed1414 at gmail com
Thanks a lot

@Widad look the page 34 there is links to download

@duterte there was something new ? “Noticed they added some wordings to clearly state the question/answer. ” Can u explain this ?

Where is the latest correction file to spoto?

Cleared today , spoto is still valid. I put same answers as 212 and vlad corrections not sure why I got 834 only after following. No complains about score, but I think we need correct answers.I nearly passed !!

Spoto IS NO Valid, i do exam this friday and spoto dump only have about 50% of the questions.

Dear Kindly confirm if the dump has been changed …..as i am planning to give exam tomorrow ,

kindly confirm
waiting for your answer Desperately

as i am confused …… as per 2nd last update this guy failed on friday, and other guys passed yesterday as well so please help

I took exam on 25 I got same questions as spoto 212, link is available on page 34.Go for it man , all the best.

@Anonymous March 26th, 2017
“Spoto IS NO Valid, i do exam this friday and spoto dump only have about 50% of the questions.”

Can You Give Us More Information ? This It True Or You are Fuc… Kiding Us !!!

I Have Exam Next Friday, Please Write Your Experience !!!

Thanck You

I think Anonymous has used one with 218, it was shared here and yes it is totally different from 212 one, I did not take the exam yet, but i think 212 is still valid

we are waiting for anyone to confirm.

212 spoto still valid i passed now with 9xx

still valid 212

TRIPI why you are making fool………..:)

still valid for today only

sammii , “still valid for today only
” what is this meaning?!

@TRIPI

BFD Control packets MUST be transmitted in UDP packets with
destination port 3784, within an IPv4 or IPv6 packet. The source
port MUST be in the range 49152 through 65535. The same UDP source
port number MUST be used for all BFD Control packets associated with
a particular session. The source port number SHOULD be unique among
all BFD sessions on the system. If more than 16384 BFD sessions are
simultaneously active, UDP source port numbers MAY be reused on
multiple sessions, but the number of distinct uses of the same UDP
source port number SHOULD be minimized. An implementation MAY use
the UDP port source number to aid in demultiplexing incoming BFD
Control packets, but ultimately the mechanisms in [BFD] MUST be used
to demultiplex incoming packets to the proper session.

https://tools.ietf.org/html/rfc5881

@ sammii, Could you please clarify, “still valid for today only”?

today 1 of my friend is passed with spoto 212… and i am not sure about tomorrow it may be valid or not

Passed today. Spoto 212 still valid.

Where are you all living broo ??? Sunday all of the person vue center are closed in my Country !!!

in KSA

Which statement about Control Plane Policing is true?
A.It queues egress packets that would otherwise be discarded.
B.It applies to packets that are generated locally.
C.It queues ingress packets that would otherwise be discarded.
D.It applies to packets that are punted to the route processor.

As per SPOTO answer is B which I believe incorrect.
CoPP is use to control traffic punted to CPU so correct answer should be D.
Anyone want to comment on this?

D.It applies to packets that are punted to the route processor.

Yes, D is the right answer. Follow the correction dump!

Refer page 36 for correction file by Vlad.

Hello All,

I have dumps from SPOTO (192+21drag&drop).
I am planning to take the exam until end of the next month. Do I need another dump except SPOTO..

Thanks in advance

Which command can you enter to disable logging for VTY lines?
A.no logging monitor
B. no logging count
C.no logging buffer
D.no logging console
E.no logging trap

As per SPOTO answer is D, this is also incorrect
correct answer is A. I verified on device.

Can I have link for latest SPOTO with corrected answers

I looked at the vlad corrections. I’m questioning #3.

3. Which two solutions can reduce UDP latency? (Choose two)
a) fast retransmission
b) fast recovery
c) low-latency queuing
d) IP service level agreement
e) congestion-avoidance algorithm

Answer: C,D

IP SLAs only measure network performance such as latency. They don’t do anything to affect it. Congestion-avoidance algorithms like WRED by definition reduce congestion. Less congestion means less delay. So shouldn’t the answers be C,E?

Thoughts?

@TRIPI

Refer to the exhibit.If router R1 sends traffic marked with IP precedence 3 to R2’s Loopback 0 address.Which class would the traffic match on R2’s Gi1/0 interface?
A.CM-CLASS-1
B.class-default
C.CM-CLASS-3
D.CM-CLASS-2
Lead2PASS and pass4 answers : CM-CLASS-2
SPOTO Correction answer : class-default

Confirmed class-default. IP Precedence 3 is DSCP 24, which doesn’t match any of AFx values of 26,28, and 30. So it goes to default.

can any one post passleader 400-101 pdf with 222 question ..
thanks

Pretty sure this spoto question is wrong.

#178.
An IPv6 network has different MTUs on different segments, if
the network is experiencing reliability issues, which option is
the most likely reason?

A The Do Not Fragment bit is marked.
B HSRPv6 is configured incorrectly.
C ICMPv6 is filtered.
D The MTLJ size is greater than 1470 bytes.
Answer. A

For IPv6, network transit devices never fragment and the “do not fragment” bit is implicitly set by default. Hosts must perform MTU path discovery on their own and fragment accordingly and use ICMPv6 for that discovery just as with IPv4.
So the answer should be C.

Another spoto maybe wrong.

# 187. Which two statements about TCP MSS are true? (Choose MO.)
A. The two endpoints in a TCP connection report their MSS
values to one another.
B. MSS values are sent in TCP SYN packets.
C.It operates at Layer 3.
D. It sets the maximum amount of data that a host sends in an
individual datagram
E .It sets the minimum amount of data that a host accepts in
an individual datagram
Answer. B,D.

I think this one is wrong. I propose it should be A,B.
A is definitely correct. So is B.
E isn’t exactly accurate. A host sends its MSS of the max it will RECEIVE. The other host MAY set its MSS to that if it’s lower than its own MSS. But if not, then it will still use its own local MSS since its smaller to avoid Layer 3 fragmentation, as will the other host.
http://www.cisco.com/c/en/us/support/docs/ip/generic-routing-encapsulation-gre/25885-pmtud-ipfrag.html

Probably wrong.

Spoto Drag-Drop #11/214

Extended ping command options

The use of “sweep range of sizes” and “set DF bit in IP header” are reversed.
Should be:

Sweep Range of Size -> Identifies the smallest MTU
Set DF bit in IP header -> identifies non-conforming MTU devices along path

http://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13730-ext-ping-trace.html

I think this spoto question is wrong.

# 71Which option describes the purpose of the as-set argument of the
aggregate-address command?
A it provides an AS path in the aggregate advertisement that contains
only the local AS number.
B.It provides an AS path in the aggregate advertisement that includes
the AS numbers of the component members.
C.It provides a predefined AS path in the aggregate advertisement that is used to indicate an aggregate prefix.
D.It provides a list of AS numbers top which the aggregate is advertised.
Answer. D.

Ignoring the typo in answer D for “top” and assuming that is “to”, as-set tells the router to include the other AS#s that the component prefixes originated from. It does NOT affect what AS#s the aggregate is advertised TO.
So the right answer should be B.

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/5441-aggregation.html

PassLeader had updated its 400-101 dumps with 222q now, I just passed yesterday by learning it, 100% valid! Good Luck!!

Part of PassLeader 222q dumps are available here:

http://www.vcedumps.net/?s=400-101

Good Luck!!!

Spoto might be wrong here.

#77.Refer to the exhibit. Which routes are advertised by the router?
A. All routers
B. BGP routes from AS 65006 and BGP routes sourced on this router
C. BGP routers sourced on this router
D. No routers
E. BGP routes from AS 65006
Answer. B.

You can’t read the bottom of the statement in the exhibit due to watermarking by them. But assuming it says “access-list 33 permit _65006_”, this reg ex says routes that pass THROUGH AS65006 since it has an underscore before and after meaning it’s not at the end or beginning of the path, although it matches that, too. That’s not the same as routes FROM 65006, which would normally be _65006$”. So it seems the answer should be C since “access-list 1 permit ^$” for locally sourced routes.
Answer. C.

Spoto might be wrong here.
#77.Refer to the exhibit. Which routes are advertised by the router?
A. All routers
B. BGP routes from AS 65006 and BGP routes sourced on this router
C. BGP routers sourced on this router
D. No routers
E. BGP routes from AS 65006
Answer. B.
You can’t read the bottom of the statement in the exhibit due to watermarking by them. But assuming it says “access-list 33 permit _65006_”, this reg ex says routes that pass THROUGH AS65006 since it has an underscore before and after meaning it’s not at the end or beginning of the path, although it matches that, too. That’s not the same as routes FROM 65006, which would normally be _65006$”. So it seems the answer should be C since “access-list 1 permit ^$” for locally sourced routes.
Answer. C.

http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13754-26.html#t3

Spoto might be wrong here.
#95 Which feature provides local database policy options that are similar to
those of TACACS+ and RADIUS servers?
A. reflexive ACLs
B. AAA attributes
C. authentication fallback
D. 802.1x
Answer. D.

This is a tough one. I see no reason that 802.1x should be the answer. The possible options are C. Aauthentication fallback since it can provide for authorization like setting your privilege level and which commands you can type just like RADIUS/TACACS do. Or, B. AAA attributes since there are “AAA attribute lists” that also do this and are even described as behaving like a AAA server to provide policies with local database.
http://www.cisco.com/c/en/us/td/docs/routers/10000/10008/configuration/guides/broadband/bba/load.html
However, it’s very specific and the spoto answer doesn’t say “lists”. Maybe they left it off. Either way, Answer B or C make more sense than D.

Spoto 212 100% changed today………..100% confirm report

come to know the paper has been changed ……so who ever is planning to give exam today please cancel the booking …. one of my friend got failed today… he got changed drag and drop.. i will get the update later…

What abaut new Exam ?
Can anyone confirm if Spoto is valid ?
Thanks

no its not vaild any more…

What abaut new Exam ?
Write more info !!! Score or somthing.

“one of my friend got failed today… he got changed drag and drop..” u say there is changed D&D and now u saiyng everything is changed !!! You i think u are fc loser who wants to confuse people, in this page are someone like it. i want to belive that you are like .

If you have some news just write. not only “It was changed”

!!!

Thanks

this is what i am saying he got changed drag and drop, and plus he got failed… and some guys from other groups are also saying the dumps are changed now. till now only one guy has failed, lets see the result of other people…i am also waiting for update

Spoto 212 is invalid. I had an examination about an hour ago and it fell. Please note.

Today i wrote the exam, I got failed. 50%of the Question got changed most of the Drag and Drop have been changed. Please dont follow this dump.

some news about exam ?

@JH can u tell use more about exam ?