Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Hi
Did anyone have experience with passleader or cciecert.net CCIE LAB dumps? recommendations?
thanks
Hi all
passed yesterday using spoto dumps. all same questions , nothing new.
now preparing for labs.
plz hlp wit spoto _ 212 azeezkanmi at gmail dot com
thanks
An IPv6 network has different MTUs on different segments, if the network is experiencing reliability issues, which option is the most likely reason?
“ICMPv6 is filtered” or “The Do Not Fragment bit is marked”. Any comments?
@Radjan
you can try cciecert or passccieexam workbook
both are good
@Radjan
you can try cciecert or passcceexam workbook.
both are good
lead2pass is still good for now.
somebody can please share exhib of spoto Q.123. thank you.
@CCIE
could you share your dump please,spoto has many wrong answers
my email id: beulsins_sonny@yahoo. fr
thanks in advance
which EEM script can you applyto the device so that logged-in users are recorded in syslog messages?
%LINK-5_CHANGE: Interface Ethernet 1/0, change state to administratively down.
please share exhibit of this spoto Q.123. thank you.
I clear my EXAM yesterday 20 march all spoto 213q valid 100%
@Anonymous
Could you share your dumps please
my email id: beulsins_sonny@yahoo. fr
thanks in advance
please send me a link / email me latest CCIE R&S dumps..
moonlite005 (at) yahoo.com
Will be very very thankful
Spots 212 still valid
Passed today
Where can I get spoto212 dump? thanks 🙂
@mango. You could find it on page 34
Thanks Exandro!
Has anyone any experience with the VCE test engine monthly subscription? Easy to cancel afterwards?
is it still valid ?
spoto question goes like this
Which options describes the purpose of the as-set argument on the aggergate address command.
Vlad says C it provides an as path in the aggregate advertisment that inlcudes the as numbers of the components numbers..
but shouldnt it maybe not be D?
it provides a list of as nnumbers to which the aggregate is advertised?
Hello brother,
hope you are fine and in best of health. I have recently passed my CCNP switch and route papers and have decided to give CCIE. For those who have appeared for the ccie or are in the process of giving the paper can you kindly tell how many months prepearation is required for CCIE?
Regards.
just passed today. spoto 212 still valid. moving on to the lab. GL guys.
BTW, any recommend for preparing the labs would be very appreciate.
spoto basic : https://www.dropbox.com/s/gqilmxqez8lljhb/400-101.pdf?dl=0
spoto correction : https://www.dropbox.com/s/i3z9oel8rpw98fh/SPOTO%20dump%20Vlad%25u2019s%20corrections_v4.pdf?dl=0
anyone who passed the exam please comfirm which do you use spoto correction or spoto basic?
Thanks
spoto still valid passed 9xx follow correction file one new question
The new ISIS Overload bit question
Its answer is the 4th choice
D-) The overload bit is set by R4 for IPv6 only.
just passed.. .. still valid
Thanks EM for sharing PDF
CCNA (325$) 22500 PKR
CCNP (300$) 25000 PKR
Microsoft retake 7000
Microsoft single take 5000
VCA 95$ 8000 PKR
VCP 175$ 15000 PKR
Contact Name: NAVEED
Contact Nunber: 00 92 321 467 0123
What about question: EEM is Embedded Event Manager which is an IOS feature you can look up. All say “rest” but I don’t understand why. andy comments? thank you
Passed today, used spoto + extras + new questions from below site. In this package everything is included that is required to pass exam. Cheapest Dumps provider ever.
http://ccie-r-s.blogspot.com/
Spoto, and pass leader are valid.. BUT!!…. some questions have gotten a few more options.. and some sentes has gotten a few added words . so dont just rely on the dumps but do a bit of study as well.. =)
New 400-251 Exam Questions and Answers Updated Recently (23/Mar/2017):
NEW QUESTION 337
Which two statements about SCEP are true? (Choose two.)
A. CA servers must support GetCACaps response messages in order to implement extended functionality.
B. The GetCRL exchange is signed and encrypted only in the response direction.
C. It is vulnerable to downgrade attacks on its cryptographic capabilities.
D. The GetCert exchange is signed and encrypted only in the response direction.
E. The GetCACaps response message supports DES encryption and the SHA-128 hashing algorithm.
Answer: AC
NEW QUESTION 338
Which two events can cause a failover event on an active/standby setup? (Choose two.)
A. The active unit experiences interface failure above the threshold.
B. The unit that was previously active recovers.
C. The stateful failover link fails.
D. The failover link fails.
E. The active unit fails
Answer: AE
NEW QUESTION 339
Which two statements about the MACsec security protocol are true? (Choose two.)
A. Stations broadcast an MKA heartbeat that contains the key server priority
B. The SAK is secured by 128 bit AES-GCM by default
C. When switch-to-switch link security is configured in manual mode, the SAP operation mode must be set to GCM
D. MACsec is not supported in MDA mode
E. MKA heartbeats are sent at a default interval of 3 seconds
Answer: AB
NEW QUESTION 340
Which two options are benefits of network summarization? (Choose two.)
A. It can summarize discontiguous IP addresses
B. It can easily be added to existing networks
C. it can increase the convergence of the network
D. It reduces the number of routes
E. It prevents unnecessary routing updates at the summarization boundary if one of the routes in the summary is unstable
Answer: DE
NEW QUESTION 341
Which meaning of this error message on a Cisco ASA is true?
%ASA-6-110001: No route to from
A. The route map redistribution is configured incorrectly.
B. The default route is undefined.
C. A packet was denied and dropped by an ACL.
D. The host is connected directly to the firewall.
Answer: B
NEW QUESTION 342
Which two statements about uRPF are true? (Choose two.)
A. The administrator can configure the allow-default command to force the routing table to use only the default route
B. It is not supported on the Cisco ASA security appliance
C. The administrator can configure the ip verify unicast source reachable-via any command to enable the RPF check to work routing groups
D. The administrator can use the show cef interface command to determine whether uRPF is enabled
E. In strict mode, only one routing path can be available to reach network devices on a subnet
Answer: DE
NEW QUESTION 343
Which type of header attack is detected by Cisco ASA basic threat detection?
A. connection limit exceeded
B. denial by access list
C. failed application inspection
D. bad packet format
Answer: D
NEW QUESTION 344
……
NEW QUESTION 345
Which WEP configuration can be exploited by a weak IV attack?
A. When the static WEP password has been stored without encryption
B. When a per-packet WEP key is in use
C. When a 64-bit key is in use
D. When the static WEP password has been given away
E. When a 40-bit key is in use
F. When the same WEP key is used to create every pack
Answer: E
NEW QUESTION 346
Which two statements about Botnet Traffic Filter snooping are true? (Choose two.)
A. It requires DNS packet inspection to be enabled to filter domain names in the dynamic database
B. It requires the Cisco ASA DNS server to perform DNS lookups
C. It can inspect both IPv4 and IPv6 traffic
D. It can log and block suspicious connections from previously unknown bad domains and IP addresses
E. It checks inbound traffic only
F. It checks inbound and outbound traffic
Answer: AF
NEW QUESTION 347
Which three statements about SXP are true? (Choose three )
A. It resides in the control plane, where connections can be initiated from a listener.
B. Packets can be tagged with SGTs only with hardware support.
C. Each VRF supports only one CTS-SXP connection.
D. To enable an access device to use IP device tracking to learn source device IP addresses.
DHCP snooping must be configured.
E. The SGA ZBPF uses the SGT to apply forwarding decisions.
F. Separate VRFs require different CTS-SXP peers, but they can use the same source IP addresses.
Answer: ABC
NEW QUESTION 348
……
Get The Newest 400-251 Dumps In PDF And VCE From — http://www.passleader.com/400-251.html (425q VCE and PDF)
Good Luck!
Is spoto 212 Valid ? Please reply
yes spoto still valid today my friend passed from spoto
yes spoto still valid today i passed with 8xx all questions from spoto. kindly follow the correction file to get 900+.
Passed today with score 9xx, following SPOTO 213 questions, and correction file
Thanks for the good news “Anonymous” – which “correction file” did you use to get 9xx score?
Passed today with 8xx. Spot 212 and vlad corrections are still valid. Just 1 new q.
Could you give us any information about new question?
hiii can you give us link of spoto dump and corrections file thanx alot off
Refer to the exhibit.If router R1 sends traffic marked with IP precedence 3 to R2’s Loopback 0 address.Which class would the traffic match on R2’s Gi1/0 interface?
A.CM-CLASS-1
B.class-default
C.CM-CLASS-3
D.CM-CLASS-2
Lead2PASS and pass4 answers : CM-CLASS-2
SPOTO Correction answer : class-default
Anyone has verified this question ?
Thank You !
Greetings, members. We are 591LAB INT’L locally in China known by SPOTO. We are CCIE|HCIE vendors who is best known for “quality”, “reliability” and “peace of mind” solutions on both Written and LAB of CCIE and HCIE(huawei). Please reach us directly for great offers over SKYPE or email. We are looking forward hearing from you soon. Visit our URL today and find out our great achievements from China and around the WORLD. http://www.591lab.com/591lab-blog
Refer to the exhibit.Which two statements about the output are
true?(Choose two)
A.BFD last failed 476ms ago on interface GigabitEthernet 0/3.
B.BGP on RT1 has negotiated the BFD capability with its peer.
C.BFD is active on interface GigabitEthernet0/3 and is using ICMP.
D.BFD is active on interface GigabitEthernet0/3 and is using UDP.
E.BFD is active for BGP on RT1
Answer:BE or (DE)
@dna,
BGP on RT1 has negotiated the BFD capability with its peer.
BFD is active for BGP on RT1
D not because BFD use TCP also. not only UDP.
Cleared with Spoto, thanks all and good luck
Please everyone make always to share your experience as it is going tough now
Just passed today! Spoto and Correction file are still valid.
Answer are not in sequence.
Q 188- Answer should be A & C.
Good Luck folks!
just passed today 9xx. spoto and vlad corrections still valid. it still have wrong answers but it’s enough to pass. Noticed they added some wordings to clearly state the question/answer. I will now proceed studying for lab (GNS vault, INE, unetlab eve and more). Good luck to all!
just passed today 9xx. spoto and vlad corrections still valid. it still have wrong answers but it’s enough to pass. Noticed they added some wordings to clearly state the question/answer. I will now proceed studying for lab (GNS vault, INE, unetlab eve and more) and DoTA2 for breaks. Good luck to all!
HI
plz some one can send me latest dump ???
{email not allowed}
@duterte 😀 DoTA2 for breaks 😀 😀 😀 😀 😀
Can anyone tell question numbers on Exam ? Thanks !