Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Can any one share the PDF/link for CCIE written ? Please email me {email not allowed}.
Q.128 Refer to the exhibit.If router R1 sends traffic marked with IP precedence 3 to R2’s Loopback 0 address.Which class would the traffic match on R2’s Gi1/0 interface?
A.CM-CLASS-1
B.class-default
C.CM-CLASS-3
D.CM-CLASS-2
Answer: I think B but class-2 can be possible? any comments? thank you
could you please let me know if the spot Q222 are still valid or not ?
CM-CLASS-2
@M-CLASS-2 thank you. ucan explan me why?
Could someone tell me please, When will we get CCIE R&S written certification hard copy in hand after exam????
Of spoto Q.25 Refer to the exhibit. Which two statements about the output are true? (Choose two)
a) BFD last failed 476ms ago on interface Gi0/3.
b) BGP on RT1 has negotiated the BFD capability with its peer.
c) BFD is active on interface Gi0/3 and is using IMCP.
d) BFD is active on interface Gi0/3 and is using UDP.
e) BFD is active for BGP on RT1.
Answer: DE o BE ? for me is BE. Any comments? thank you
BGP on RT1 has negotiated the BFD capability with its peer.
BFD is active for BGP on RT1.
How do i get the Spoto212 questions
Never mind got it… thnx
q 146
Which IS-IS metric style is most suitable for MPLS Traffic Engineering?
A. Narrow
B. Wide
C. Transition
D. Flat
Spoto answer is A. Narrow.
Shouldn’t it be B. Wide?
Guys i need help in CCIE Data center written exame can some one help what site is valid to prepare Data center exame and get exaem question ?
Just use the examunion version is ok @ccie_1_more valid
Guys, which of the spoto are valid ? 212 or 222, and please share whichever is valid … I am planning for next week…
Just passed 400-101 with 87x , studied spoto 213 vce and vlad correction, here below :
213 q
http://www.megafileupload.com/1qcai/400-101_WIPv3.
Vlad corrections:
http://www.filehosting.org/file/details/640470/SPOTO%20dump%20Vlad%E2%80%99s%20corrections_v4.pdf
Good luck all 🙂
Pass today now with 8xxx same spoto and Vlad ,no new questions
could you please know me know if the dumps are still valid or not ?
Valid Still passed two hours before
Just passed 400-101 with 87x , studied spoto 213 vce and vlad correction, here below :
213 q
http://www.megafileupload.com/1qcai/400-101_WIPv3.
Vlad corrections:
http://www.filehosting.org/file/details/640470/SPOTO%20dump%20Vlad%E2%80%99s%20corrections_v4.pdf
Good luck all ?
CCIE rs can you tell us which answers you used as lots of answer are wrong on spoto ,also please guide on Drag and Drop if the answer are correct.
Can anyone please send the VCE Software that can start the Spoto 213 Q above?
Thank you very much.
@eromaid wide
@0101
Vlad correction says DE.
I tend to agree, since BGP registers with BFD to receive notifications failures, but doesn’t negotiate directly BFD capability with its BGP peer.
Drag & Drop questions:
provides accounting information for EXEC shell commands at a specific priviledge level
Is this “command” or “EXEC”?
@Pippo “command”.
and know vlad says DE but..is using UDP” ??
@Pippo link for reference to confirm “command” http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfacct.html
Pass today with a score 88x
only one new question
Which three of the following security controls would you take into consideration when implementing loT capabities?(Choose three.)
A.Layered Security Appoach.
B.Place security above functionality.
C.Define lifecycle controls for loT devices.
D.Privacy impact Assessment.
E.Change passwords every 90 days.
F.Implement Intrusion Detection Systems on loT devices.
Answer:ADE
Has anyone Verified this question?
@Cciers Thanks a lot for sharing Vlad’s corrections !!
Dears, passed with 9XX , thanks for your help and support.
The new ISIS Overload bit question
http://www.mediafire.com/view/sod2v43nv3axc92/IMAG0870.jpg
Its answer is the 4th choice
D-) The overload bit is set by R4 for IPv6 only.
Good Luck guys and appreciate your updates.
Any one check if the answer is correct for this?
Q.30 Which two statements about IPv4 and IPv6 networks are true? (Choose two.)
A.In IPv6, hosts perform fragmentation.
B.IPv6 uses a UDP checksum to verify packet integrity.
C.In IPv6, routers perform fragmentation.
D.In IPv4, fragmentation is performed by the source of the packet.
E.IPv4 uses an optional checksum at the transport layer.
F.IPv6 uses a required checksum at the network layer.
Answer:A B
@eromaid AE
Today I passed CCIE written exam.. same Qs except one new.
@0101
Yes BFD uses UDP port 3784/3785
@Pippo Ok.. uses both. BDF: 3784/tcp and 3784/udp.
BFD-Control: 3785/tcp and 3785/udp.
Which feature provides local database policy options that are similar to
those of TACACS+ and RADIUS servers?
A.authentication fallback
B.reflexive ACLs
C.AAA attributes
D.802.1x
Answer:D
I think is A
@dna why? I think is AAA attributes
Which feature provides local database policy options that are similar to
those of TACACS+ and RADIUS servers?
A.authentication fallback
B.reflexive ACLs
C.AAA attributes
D.802.1x
Answer:D
sticking with D on this.. AAA authenication authorization and access.. ..reflective ACL can be used but would have to be created per instasnce..
Authenciation fallback is what happens when the authentication fails.. its not a method similar to radius or tacacs…
your left with d… where 802.1x is based on the eap protocol
kinda comes down to how you interpret the question I guess..
The question 126 in SPOTO:
Which command can you enter to disable logging for VTY lines?
A.no logging monitor
B. no logging count
C.no logging buffer
D.no logging console
E.no logging trap
Answer:D
I think answer should be “A”, not “D”, what do you think?
…
hello, are the lab exams from PL for the CCIE worth the money? are they actual lab questions?
question
Refer to the exhibit which addication configuration statement is requiret on R3 in order to allow multicast traffic along the shared tree
A) ip mroute 10.4.4.4. 255.255.255.255. tun 0
B) ip route 10.4.4.4 255.255.255.255. tun 0
C) Ip mroute 192.168.14.0 255.255.255 tun 0
D) Ip route 192.168.14.0 255.255.255 tun 0
answers for vlad and sport says.. B.. but isnt A more correct?
Passed 400-101 exam yesterday! 9xx/1000 marks!!
Learned all questions from PassLeader 400-101 dumps (222q), 100% valid for passing!
You can get part of that PL 400-101 dumps here:
http://www.vcedumps.net/?s=400-101
Good Luck!!!
Passed 400-101 exam yesterday! 9xx/1000 marks!!
Learned all questions from PassLeader 400-101 dumps (222q), 100% valid for passing!
You can get part of that PL 400-101 dumps here:
http://www.vcedumps.net/?s=400-101
Good Luck!!!
@0101
Sorry to insist, where did you find that BFD is using also TCP? I doubt it, since it has to be a sub-milliseconds reaction protocol, and only UDP can guarantee that, definitely not TCP which is vased on congestion control, Syn, acks, etc.
Makes sense?
Hi there,
Just passed it. 9xx. Spoto_212 is still valid. No new questions.
Good luck buys!
thinking to take exam tomorrow, some one please provide valid link.Thank you and much appreciate it. Jhon if you can paste the link, as you are the recent guy to pass.
passed today the Spoto are still valid
Hi all, I passed last friday. Spotto and PL 222q still valid. All you need to pass are on this site. Please search backwards.
have the latest test:
http://online.it-training.pro/it-testing-skills-vce/Online-Tests-Latest-Actual-Questions-Premium-for-Cisco-CCIE-Routing-and-Switching-400-101