Share your CCIE v5 Written Experience

@CCIE wannabe , could please let me know if all the question were same as menitoned in the dump or there was any new question?

All the questions were the same, some of the answers had different wording.
And the answers were scrambled compared to the vce and pdf.

This set of questions has been around for far more than twenty days now, do anyone knows about how much time do they change the set?

plz share VCE file for 105 & 125 dumps …THanks

http://goo.gl/NBX95I

V4 questions have been around for several years without change. Nothing new there.
V5.1 is comming this summer, i strongly doubt they will change this one any more.

plzzzzzzzzzzzzzzz update me if the 105&125 valid till when urgen coz my exam after 10 days :SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS

@CCIE wannabe
that goo.gl shortlink has been disabled. It was found to be violating google policy

Those files can be found @ http://certcollection.org/forum/forum/189-ccie-rs-shares/

someone plz share VCE file

@CCIE wannabe , so that’s mean they shuffled the options , but were same answers?

Answers are shuffled, some of the answers wording is changed too.

https://dl.dropboxusercontent.com/u/75344915/ccie%20rs%20dumps.rar

Hi Guys,

I just passed this morning (30 mins ago) and all questions were from 105. Yay!!

Good luck and get in quick!

Do you think Is it correct answer? I think the correct answer would be “D & E”

————————————————————————————————–

Refer to the exhibit. The Main1 and Branch1 switches are connected directly over an MPLS pseudowire, and both run UDLD.
After router B1 reloads because of a power failure, the pseudowire is restored.
However, the Branch1 switch is unable to reach the Main1 switch. Which two actions can you take to restore connectivity and prevent the problem from recurring? (Choose two.)

A. Configure a backup pseudowire between the Main1 and Branch1 switches.
B. Enable UDLD recovery on both the Main1 and Branch1 switches.
C. Configure a backup GRE tunnel between the Main1 and Branch1 swiitches.
D. Enable errdisable recovery on both the Main1 and Branch1 switches.
E. Issue the shutdown and no shutdown commands on both the Branch1 switch’s uplink to the B1 router and the Main1 switch’s uplink to the M1 router.
F. Issue the shutdown and no shutdown commands on the Branch1 switch uplink to the B1 router only.

I think E is correct because UDLD on both the Branch1 switch and the Main1 switch would be put their respective ports into errdisable.

I also think there are a couple of other wrong answers in the 105 file.

The BGP / IGP question – synchronisation seems to be the answer to me based on the info given and wording of the question.

ISIS ES/IS question – I think the answer is MTU mismatch. There is a doc on cisco.com about it.

@BB

really appreciated. Yes, I think so. usually we need to be reloaded both of switches..

Yes.. the ES-IS question… I’ve confirmed it from Cisco
http://www.cisco.com/c/en/us/support/docs/ip/integrated-intermediate-system-to-intermediate-system-is-is/47201-isis-mtu.html

Thank you again

Hi Guys, I’ll be taking the exam this friday. Can someone please share VCE file for 105q and 125q? Please email it to {email not allowed}. Thank you so much!

Oh, email is not allowed. Can someone share the link instead? Thank you.

Just passed w/ 900+. All questions from updated 105. Thanks all!

@CCIE_legit – Can you please share the dumps.
Thank you!

CCIE_legit what you mean by 105 updated ?

CCIE_legit u put a confusion comment ..is there any update in 105 dumps ..?

Can someone please send me updated 105 if possible soon ?{email not allowed}

CCIE_legit is there any update 105 dumps if so can you please share the link please
Thank you so much

dumps 105/125 are still valid, i passed today and most of the answered were shuffeld

Guys, some of you are really lazy.
Ccie is about knowledge and understanding how networking works.

I can’t imagine how are you at work if you are not even able to found a link in a 4 pages phorum, what will happen during design or tshoot phases on daily basis.

This is my experience, that is what this is about, share your experience, not ask for dumps.

@Real student ..LOL!!! i agree with you.

someone taking written exam in Karachi pakistan ?

Real Student, lol … very funny.

someone from KHI pakistan ?

Both dumps 105/125 are still valid as of now, i passed today

Ladies and Gent , 105 is still valid. just breezed through the exam , just need to practice , also pay attention to details on the answer. see on the lab . good luck to all. and thank you for sharing.

Ypdate 9f there are changes please

Please advise if anyone will take the exam tommorow, thanks

NO LAB !!!
CAN YOU PLEASE SHARE EXPERIANCE ON LAB AND ALSO SOME MORE LABS

Is there a reputable place to buy latest vce files which have 105 or 125 questions (not those which have over 800 questions!).

@Real Student….all test are created for you to fail. What that means is that although you can be very knowledgable and have experience….U can still without a doubt fail the test. Therefore; if there is a systematic way to pass the test and get your CERT…U do it!!! Not everyone are paper CCIE’s and CCNP’s…the more majority of the people actually know this stuff.

@BabyBoy, YOU ARE CORRECT. I’m really great at my work, in-fact I was the employee of the year for 2 straight years but I really having hard time answering the questions without any help from dump files. @Real Student, If you are really good and don’t need dumps or anything, why browse this page? LOL

@BabyBoy and @Juniper – Would you be able to guide me how should I prepare for CCIE written?
Thank you!

Guys need help on this question. What are the correct answers? I’m sure for A and F.

46. Which two statements are true about unicast RPF? (Choose three.)
A. Unicast RPF requires CEF to be enabled.
B. Unicast RPF strict mode works better with multihomed networks.
C. Unicast RPF strict mode supports symmetric paths.
D. Unicast RPF strict mode supports asymmetric paths.
E. CEF is optional with Unicast RPF, but when CEF is enabled it provides better performance.
F. Unicast RPF loose mode is typically used with ISP networks.

It is fine that everyone is gaining success in CCIE written with 105 file. I wished there would have been explanations too for all the questions for proper learning.

Any way whats about Lab??? how you people are practicing??

Are these labs (on this site) are enough to clear CCIE Lab exam??

Some one please answer.

@Anonimous You have to choose three options, ACF. @CCIEHunt The 140 questions file has some explanations, hope you can find your way to it

The question: Which BGP feature prevents a router from installing an iBGP learned route in its routing table until the route is validated within the IGP?

A. Confederation
B. Aggregation
C. Advertise-map
D. Synchronization

in some files the proposed answer is B and in others is D, AFAIK it should be D, why it says it should be B?

The answer for that is D, Synchronization… You can google about BGP Synchronization for more information.

105q is 100% valid…

Passed just now

dont go for 140q…. 105q is enough hurry up guys…

Ill take my exam on saturday i hope dumps still valid until end of march

is there someone from Karachi ? who had attempted the exam.

105 still 100% valid. Hurry up and good luck!