Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Why shouldn’t this be option C (single topology IS-IS)?
Q 131
Refer to the exhibit.What type of IS-IS is configured on R1?
A.VRF-aware IS-IS
B.multi-process IS-IS
C.single-topology IS-IS
D.IS-IS version 2
Answer:D
This is for sure wrong. The correct is class-default. I just labbed it to confirm.
Q 128
Refer to the exhibit.If router R1 sends traffic marked with IP precedence 3
to R2’s Loopback 0 address.Which class would the traffic match on R2’s
Gi1/0 interface?
A.CM-CLASS-1
B.class-default
C.CM-CLASS-3
D.CM-CLASS-2
SPOTO CCIE Club
Answer:D
==
My tests (when pinged from R1 with IP Precedence 3 aka DSCP CS3 aka TOS 0x60 set in ping):
R2#show policy-map interface fastEthernet 0/0 input | in Class-map|packets
Class-map: CM-CLASS1 (match-any)
0 packets, 0 bytes
0 packets, 0 bytes
Class-map: CM-CLASS2 (match-any)
0 packets, 0 bytes
0 packets, 0 bytes
Class-map: CM-CLASS3 (match-any)
0 packets, 0 bytes
0 packets, 0 bytes
Class-map: class-default (match-any)
10 packets, 1140 bytes
please cnfirm any pased today ???
HI please update exam information. i will take march 8
spoto 212Q is vaild? please advice me
Wrote yesterday. Spoto 212 not valid. questins look similar, but are not the same
@Rands
I passed today with Only SPOTO 212
Please don’t spread wrong information 🙂
@Solo, i am not spreading any wrong info. Just saying what i experienced.
I passed with 9xx
but the ospf question from Spoto 212 about the type 3 lsa, in the exam didnt have the metric option.
Also: Q.176
Which three fields are present in the IPv6 header? (Choose three)
A.Next Header was not in the options.
There were other small changes as well. you need to understand the questions. only way you will pass
Just saying that the questions were not identical to the Spoto 212Q
@ Rands only few changes, this doesn’t make the dump NOT Valid
I passed today Also and I noticed those changes.
Thanks
Hey guys, Just cleared the test. all questions from the Spoto 212 and the overload q.
Respected fellows i am trying to give exam in 2-3 days which one should i prepare , will 212 questions will be valid till two days or not please advice me will be thankful to you
Spoto Q. 78.
You are configuring CoS-to-DSCP mappings with three requirements:
*COS 1 must be translated into AF13.
*COS 2 must be translated into AF22.
*COS 5 must be translated into EF.
Which configuration command can you use to implement the requirements?
A. mis qos map cos-dscp 0 10 18 24 32 46 48 56
B. mis qos map cos-dscp 0 12 18 24 32 46 48 56
C. mis qos map cos-dscp 0 14 20 24 32 46 48 56
D. mis qos map cos-dscp 0 12 18 24 32 40 46 56
Answer: why the answer is C, can explain me? thank!
@0101,
The format is AFxy. And you can convert using the formula 8x + 2y. So AF13 = 8*1 + 2*3 = 8+6 = 14.
Furthermore the answers all follow the format mls qos map cos-dscp cos0 cos1 cos2 cos3 cos4 cos5 cos6 cos7.
So COS1 translated into AF13 means the value in the COS1 spot must equal 14. Likewise the value in the COS2 spot must equal 20 (ie. 8*2 + 2*2 = 16+4 =20). EF means expedited forwarding, which is always equal to 46. So the COS5 position must be equal to 46. The only answer showing COS1=14, COS2=20, and COS5=46 is Answer C.
HI Please update exam information.
i add the spoto qq group, one member from spoto says 212q only can pass with 860 if you all remember the answer, i will take the exam March 8th 2017 14:15 pm utc+8, i will back to update the exam information
spoto say they dumps have 214q, so i thinks the 212q maybe has some incorrect answer
@AF13. Nice explanation. Thanks.
Can any one explain what is the rite ans for the below question, when i see th document it says the ans must be A and E but dumps says A & B.
Which two Cisco Express Forwarding tables are located in the data
plane?(Choose two.)
A.the label forwarding information base
B.the forwarding information base
C.the label information table
D.the IP routing table
E.the adjacency table
@BLR
A & E are correct as per the document.
Cisco Express Forwarding (CEF) maintains two tables in the data plane. Specifically, the forwarding information base (FIB) maintains Layer 3 information, whereas the adjancency table maintains Layer 2 information for next hops listed in the FIB.
@BLR
Correcting the typo….
B & E are correct as per the document.
Cisco Express Forwarding (CEF) maintains two tables in the data plane. Specifically, the forwarding information base (FIB) maintains Layer 3 information, whereas the adjancency table maintains Layer 2 information for next hops listed in the FIB.
Guys just to let you know. I passed today 925 points. studied spoto 212 and the corrections mentioned in this forum.
Now SPOTO has 213 Qs or even 214 Qs please update guys, do please !!!!
Too many SPOTO 212 Qs !!!!!!!!!!!!! We don’t know which to use anymore at all !!!
Help us too !!!!!
@ Kenvin, congratz….. did you check the corrections on
http://www.megafileupload.com/1qcai/400-101_WIPv3.vce
What about the questions type ? have they changed?
@Kevin congrarts …
Please confrim any chagnes in the dumps . iam givin the exam tomarrow
@Kevin, 1 major help. Can you go over that vce & confirm if all questions/answers are matching to as per you what wrote? This way we can be sure that the vce is correct. I think the vce is wrong for at least 3 questions (my comments yesterday).
passed the exam with 860 use spoto 212q on 8-march-2017 afternoon utc +8.
all answer use spoto dump. in my exam have 8 drag question.
@echo, 1 major help. Can you go over that vce & confirm if all questions/answers are matching to as per you what wrote? This way we can be sure that the vce is correct. I think the vce is wrong for at least 3 questions (my comments yesterday).
@Network Dummy
I also use 400-101_WIPv3.vce for practice, this vce file some answer i thinks is correct than spoto, because i checked cisco document.
but during my exam, i use spoto answer, because many people use spoto ansewer.
@ Network Dummy
so, if you can remember all the question and answer from spoto 212Q, you sure can pass the exam
hi all i would like to inform pass 9xxx with spoto 212Q
anybody wants spoto 212 quesitons ?
@echo, Thanks for the confirmation. Even I found some answers in the vce to be wrong (specifically the questions that I pasted above). Anyway this is good info.
Hi All,
Can someone confirm the answer the following question ?
Which two commands should you enter to enable IP Source Guard with
IP and MAC address filtering?(Choose two)
A.ip verify source tracking
B.switchport port-security
C.ip verify unicast source
D.ip verify source
E.ip verify source port-security
Be careful guys as you go and sit hands on exams like CCIE the cisco staff will be checking on you to see whether you are cheating using brain d//umps and may expel you from the cisco roaster.
Sitting cisco exams is almost not worth it anymore, get out while you can and go and sit better pearsonvue exams.
Since i am not a CCIE yet i may not reply to your comments since i don’t really belong in this section of the website.
So be careful if it looks like you didn’t go to a proper boot camp cisco will want to make your life miserable in addition to stealing all your money.
I found it annoying that i had to be sitting cisco exams every year but now they will be checking up on my ass because i didn’t bother to die on my homework table for 5 straight months? That i didn’t return to those hours of studying for 10 straight hours neither talking to my family or going to my friends?
And if i slip up on my revising even a little bit i have to spend 2 weeks relearning how to connect my router to the internet because i keep forgetting it’s a 4 step process. (nah make that 5 cause i keep forgetting ip route and the magical effects of 0.0.0.0 0.0.0.0, i wonder if 0.0.(000).0 works so i can avoid constantly bumping into my relatives network).
Don’t i have other things to do!? Don’t i have other exams to sit!? or (gasp) spend time to plan my life.
I am not saying don’t sit the exam if you really love it but pray to god you do not get mistaken for a cheater because you did not exclude an aura of (hardwork’ness) or you actually know how to reverse engineer questions you have never seen before but still get marked on the exam because you look too “ditzy” to be a nerd.
I have passed today with 9xx. Spoto is valid.
passed 9xx spoto is valid !!!
@AF13 = 14 😉 thank u 4 your explanation
Hey guys,
passed today with 212 Questions spoto with Corrections. I had 9xx
?
Hi guys is it spotto 212q is valid….?
I have doubt about, thank you!
Which statement about Control Plane Policing is true?
A.It queues egress packets that would otherwise be discarded.
B.It applies to packets that are generated locally.
C.It queues ingress packets that would otherwise be discarded.
D.It applies to packets that are punted to the route processor.
@Amonymous, congrats! how many question in exam?
I’will take this exam tomorrow… I guess that is stable now with 222 spoto… anyone have feedback?
Anonymous,
The answer should be D.
CoPP applies to all packets that punt to the route processor for handling.
I passed today . Spoto 212 is vaild
@anmo
B and E
When IP source guard with source IP and MAC address filtering is enabled, DHCP snooping and port security must be enabled on the interface
Thank you netring.
@ chiyang wong
is you have any update on the written i am planning for the written in 2 weeks.
having old update abhighel as i see many new questions are have been added in the written exam.
Which IPv4 feature prevents multicast joins on a per-port basis?
A.MLD filtering
B.IGMP snooping
C.IGMP filtering
D.PIM snooping
Answer:B
Which Catalyst switch feature configured on a per-port basis can be used to prevent attached hosts from joining select multicast group?
A. IGMP Filtering
B. MLD Filtering
C. IGMP Snooping
D. PIM Snooping
Answer:A
I think answer should be IGMP Filtering for both questions. any comments ?
@anmo, I agree. I had pointed this out in page-34 too. I am waiting for someone else to confirm too.