Share your CCIE v5 Written Experience
Please share with us your experience after taking the CCIE v5 Written exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note: There are some guys trying to sell workbook, videos or even group buy for CCIE exams in the comment section. Please be careful and double check everything before making your decision. Many of them are scammers and just sell old materials or steal your money.
Which two commands should you enter to enable IP Source Guard with IP and MAC address
filtering? (Choose two)
a) ip verify source tracking
b) switchport port-security
c) ip verify unicast source
d) ip verify source
e) ip verify source port-security
Which statement about Control Plane Policing (CoPP) is true?
a) It queues egress packets that would otherwise be discarded.
b) It applies to packets that are generated locally.
c) It queues ingress packets that would otherwise be discarded.
d) It applies to the packets that are punted to the route processor.
Refer to the exhibit. What type of IS-IS is configured on R1?
A. VRF-aware IS-IS
B. ISIS version 2
C. single-topology IS-IS
D. mufti-process IS-IS
correct ans plz
B or C
anyone can share VCE ?
where is the exhibit
Passing score was in low 800s. Passed in low 900s using Spoto 212, 192, 136, and an exam with 1069 questions. So I feel some answers in study material are incorrect. But the study questions are correct. Do your due diligence.
No surprises other than the overload bit one. I understand overload bit, but this was an IS-IS show command output. If you labbed IS-IS using the overload bit, the answer might be more self evident. Wasn’t familiar with the output. Had to wing it.
Passed with 860 on Friday. Studied with 212Q. I had 1 new question out of 100.
@Passed CCIE Written congrates, do you remember what was the new question ? overload?
@Jermey Can’t remember what it was. Sorry. but everything else was from Q212.
@Passed CCIE Written
Is it a question that refer to an exhibit ?
R5#show isis database R4.00-00 detail
what is the answer for ISIS exhibit question? R5#show isis database R4.00-00 detail exhibit?
Do we find this question in any of the dumps? Spoto or PL?
Which two statements about PfR are true?(Choose two)
A.It manages traffic classes
B.It provides a narrower scope of route control than OER.
C.It provides intelligent route control on a per-application basis.
D.It supports split tunneling and spoke-to-spoke links.
E.It always prefers the least cost path.
AC or AE correct ans plz
123
What do you guys think about the eb8y dump mentioned here? Does it hand out the latest PL for the listed price?
Is spoto 212 still valid ?
Can anyone suggest where to get VCE Player for MAC OSX
guys prepare spoto 212 it is valid
i passed my exam
failed,
PL222Q no longer enough
@ciccio.pilota, roughly how many new questions did u get ?
@ciccio.pilota, this is scary news. anyone else? since ccie said today too that he/she passed.
also were the questions different or the answers not matching to what we had been seeing in SPOTO?
Today i passed ccie written. Spoto is still valid. Only one question about is-is overload is different.
Congrats agony&pain , i hope ciccio.pilota can shed some more light on how he failed, how many questions he got new? or some other issues? please advise.
@ ccie & agony&pain: Congrats.
@ ciccio.pilota : Can you tell me about your experience ?
Guys: I think Now Spotto is valid and as per experience of many candidates , All guys are passing with Spotto with 1 new question.
agony&pain , have u done only spoto? but answers are not correct in spoto?
Please advise
@agony&pain
How much you got ???
spoto 212 & psldr 222q they are valid
its enough to pass the exam
is-is overload ans is
the overload bit is set by R4 for IPV6 only
is-is overload question: R5#show isis database R4.00-00 detail
Answer is the overload bit is set by R4 for IPV6 only
My score 9xx.
I used only spoto 212 dump. Lots of answers are correct. it is enough to pass now.
Any one who passed using SPOTO please share it with us
I have passed CCIE RS written today Spoto 212 and PL 222 still valid.
I have passed CCIE RS written today Spoto 212 and PL 222 still valid.
@solo check the previous comments you will find the link for spoto 212q
It would be very helpful if someone could recollect the isis overload question (the answer appears to be the IPv6 only option but more than the answer, the question itself if known would be better). Someone who may have attempted the exam & remember, kindly recollect here.
Router# show isis database detail
IS-IS Level-1 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
0000.0C00.0C35.00-00 * 0x0000000C 0x5696 325 0/0/0
Area Address: 47.0004.004D.0001
Area Address: 39.0001
Metric: 10 IS 0000.0C00.62E6.03
Metric: 0 ES 0000.0C00.0C35
0000.0C00.40AF.00-00* 0x00000009 0x8452 608 1/0/0
Area Address: 47.0004.004D.0001
Topology: IPv4 (0x0) IPv6 (0x2 OL)
NLPID: 0xCC 0x8E
IP Address: 172.16.21.49
Metric: 10 IS 0800.2B16.24EA.01
Metric: 10 IS 0000.0C00.62E6.03
Metric: 0 ES 0000.0C00.40AF
IPv6 Address: 2001:0DB8::/32
Metric: 10 IPv6 (MT-IPv6) 2001:0DB8::/64
Metric: 5 IS-Extended cisco.03
Metric: 10 IS-Extended cisco1.03
Metric: 10 IS (MT-IPv6) cisco.03
A-) The overload bit is not set for any topology under router IS-IS on R4.
B-) The overload bit is set by R4 for IPv4 and IPv6.
C-) The overload bit is set by R5 for IPv6 only.
D-) The overload bit is set by R4 for IPv6 only.
E-) The overload bit is not set for any topology under router IS-IS on R5.
F-) The overload bit is set by R5 for IPv4 and IPv6.
@network dummy this for u
http://www.megafileupload.com/1qcai/400-101_WIPv3.vce
spoto 212q
https://drive.google.com/file/d/0B6vYNS8cNxA7d3pXVmZ4ajg2ckE/view?usp=sharing
spoto 212q
for everyone
@ccie
How much you got ???
I can see some errors has been solved !!!!
Thanks a lot @ccie.
I passed today ….. 852 ….. the only new question It was the previously posted here…..all question in SPOTO 212…..
Router# show isis database detail
@Nobru
Did you use this one????
http://www.megafileupload.com/1qcai/400-101_WIPv3.vce
i passed today, SPOTO 222 is 99.9% valid with one new question ( ISIS R5#show isis database R4.00-00 detail)…. 222Q is still valid..
Beware: 99 questions are from SPOTO but answers may not be accurate, i double checked each and every answer and made no mistakes…still got just 82x score, just passed.
Suggestion: make sure you revalidate ALL the answers from SPOTO as now we are sure that all the questions are coming for those 222Q.
Best of Luck…
@TJ
Spoto errors has been solved and the file was shared !!! people got around 9XX with that !!
http://www.megafileupload.com/1qcai/400-101_WIPv3.vce
@Kr
I just see here, all questions are in this vce … I don’t sure about the corrections..but most part It’s exactly the same as the one I studied in SPOTO 212.
My bad, i didnt see it earlier, glad i am passed 🙂
Thanks for the update.
HI please update exam information. i will take march 8
spoto 212Q is vaild? please advice me
Hi Guys
I passed today with 9xx/1000 using SPOTO 212 questions
All questions are from spoto 212 except is-is overload
Spoto 212 still valid
Can someone help explain? Something is not right between the 2 questions since as per link: http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_consolidated_config_guide_3850_chapter_0100111.html#ID1056 both are only ‘IGMP Filtering’ but for some reason for Q129, the correct answer is being set to ‘IGMP Snooping’:
Q 129
Which IPv4 feature prevents multicast joins on a per-port basis?
A.MLD filtering
B.IGMP snooping
C.IGMP filtering
D.PIM snooping
Answer:B
==
Q 190
Which Catalyst switch feature configured on a per-port basis
can be used to prevent attached hosts from joining select
multicast group?
A. IGMP Filtering
B. MLD Filtering
C. IGMP Snooping
D. PIM Snooping
Answer:A