Share your CCIE v5 Written Experience

@ maguphe,

you passed the R&S written?

Hello,

i am preparing my ccie lab exam but i dont have equipment to buy physical lab. anyone can help me how to set up GNS3 to prepare the exam?

anyone can share VCE for spoto 212q

Passed with 813. I used Passleader CCIE version 15.1 as a study guide. Only about 50 percent were on the test. The latest verison 17 has 1315 questions on. Best to really know your stuff when taking the exam because you might not get what is on the dumps.

whoever can do this without a dump I give props too, but I’m not going to pay 400 dollars over, especially if the material isn’t in the official certification guide.

Hi,
from pass4sure:
Which two Cisco Express Forwarding tables are located in the data plane?
Correct answers:
-the adjacency table
-the forwarding information base

Is different as SPOTO. What do you think is correct ?

can anyone share the VCE for valid dumps

Label forwarding table, forwarding table.

Another one:

R1 and R2 advertise 10.50.1.0/24 to R3 and R4 as shown.R1 is the primary path. Which
path does traffic take from the data center to the file server?
Correct answer:
-All traffic travels from R4 to R2 to the files server.

Another mismatch. What do you think is correct ?

It will take shortest as path to the last bgp router then to server.

From Vlad’s correction pdf, i have different answer :

6. Which two Cisco Express Forwarding tables are located in the data plane? (Choose two)
a) The label forwarding information base
b) The forwarding information base
c) The label information table
d) The IP routing table
e) The adjacency table
Answer: BE ====> AE(correct)

I think for data plane the answer should be A and E. LFIB an adjacency tables are in data plane.
The FIB and routing table are same thing and are control plane .

Any comments?

@ maguphe , Eustace kindly kindly send me valid dumps on lubpervaiz at gmail dot com

Hello
I am very confused I need the correct valid dumps my exam on 1/3
brown_83200 at yahoo dot com
thanks
P.S can anyone who passed the exam confirm do answer come in same order or different

Hello
I am very confused I need the correct valid dumps my exam on 1/3
brown_832000 at yahoo dot com
thanks
P.S can anyone who passed the exam confirm do answer come in same order or different

FIB is in data plan, created from RIB from control plane.

If you Google it more, you will see a YouTube explained it. I saw LIB and FIB.

its FIB & AT. LIB is when you have labels/MPLS

Hello plz share valid dumps lubpervaiz at gmail dot com plz plz

anybody have a vce for spoto can please mail me at wazup010101 at gmail or a link

Hello
I am very confused I need the correct valid dumps my exam on 1/3
nguyen.minhtin94 at yahoo dot com dot vn
thanks

Hi
I need the correct valid dumps my exam on 1/3
nguyen.minhtin94 at yahoo dot com dot vn
thanks

Please where is the link for spoto vce format 212Q ?
please share the download link here or to this mailbox
stavel95@gmail
thanks

Interesting information…

I think it’s going to be LIB and FIB

CEF is a forwarding plane cisco proprietary protocol to determine which connection a packet will forwarded to.

LIB = Label Information Base
FIB = Forwarding Information Base

Which are both used by CEF to determine where the packet will be forwarded . Adjacency Table is stored in the RIB (Routing Information Base) which I believe is in the Control Plane.

So i think the answer is LIB and FIB

LFIB I mean… Label forward information base.
To use MPLS, CEF is a requirement.

@Jose Congratz mate! any new questions you saw?

I don’t know how you did the 1315q! man that is so much information to go in one time… i have both dumps but i’ve been leaning on the SPOTO dump since it’s only 215 questions. Test out this friday

Please I am still waiting for valid dumps my email is lubpervaiz at gmail dot com. Thanks

Passed today with spoto 201 dump. All question from there that dump t one. Good luck

Refer to the exhibit.What type of IS-IS is configured on R1?
A.VRF-aware IS-IS
B.multi-process IS-IS
C.single-topology IS-IS
D.IS-IS version 2
Answer:D

IS-IS version2?..

this one refers single topology is where ipv4 and 6 can be configured under the same topology right?

@mohammed anee can u provide the passleader dumps
thanks

Congrats Scrubs can u plz share spoto 201 at lubpervaiz at gmail dot com

Single topology

Thanks Superkknd

Q 171
When you implement the EIGRP add-paths feature, which
configuration can cause routing issues on a DMVPN circuit?
A. disabling ECMP mode underthe EIGRP process.
B. disabling automatic summarization
C. enabling next-hop-self under the EIGRP process.
D. enabling synchronization under the EIGRP process
E. disabling the default variance underthe EIGRP process
F. disabling NHRP when deploying EIGRP over DMVPN
Answer: E

I got another one =)

eigrp add path feature.. looking at the configurations examples on cisco it mentions this :

Device(config)# router eigrp name
Device(config-router-af-interface)# no next-hop-self no-ecmp-mode
xxx
xxx
xxx

the answer regarding this question tells us its the variance command and you shouldnt diable the default variance.. but.. you dont touch it nothing will happen.. wont you need no next hop self command.. or is this probably off by default as well?

Yes i agree with wazup.

FIB is cef table is in data plane . I misunderstood it to be RIB.

Since question does not talk about mpls and labels .

The answer would be as Vlad …FIB and adjacency table.

Singh

the answer should be LFIB and FIB

got another question regardin PFR.. where.. I dont really see the logic if someones feels like explaning please do:

Refer to the exhibit. Which statement is true?
A. The Cisco PfR state is UP; however, the external interface
Et0/1 of border router 10.1.1.1 has exceeded the maximum
available bandwidth threshold.
B. The Cisco PfR state is UP; however, an issue is preventing
the border router from establishing a TCP session to the
master controller.
C. The Cisco PfR state is UP and is able to monitor traffic flows;
however, MD5 authentication has not been successful
between the master controller and the border routers.
D. The Cisco PfR State is UP; however, the receive capacity was
not configured for inbound traffic.
E. The Cisco PfR state is UP, and the link utilization
out-of-policy threshold is set to 90 percent for traffic exiting

the answer given here is E.. but where in the output do you see anything about 90 percent trafici exiting?

@Mohamed Anee

Did you study the complete Passleader 222 Qs or just the free one ????

@Spoto

500 *0.90 = 450

@spoto
E is 100% correct. I found a link explained it before.
disabling the default variance underthe EIGRP process

thanks Superkknd =)

ahhh.. got it regarding the pfr =)

Appreciate the banter. to bad I cant really find a good forum for all this without all the spamming of fake dumps..

I agree o n the variance as well I found the document on it I am just thinking if the question is more open.. yeah.. anyways.. ..

hmm came across something else

I have set up vss a few times.. always with the switches right next to each other.. but is this actually a must?.. or could they be .. set far apart.. as long as they are managed by one ip? (and the nessacarry cabling in between? .. I am not saying its practical.. I am just thinking about this.. when it comes to this question

Which two statements about VSS are true?(Choose two)
A. It requires physical switches to be collocated.
B. It is dependent on spanning-tree.
C. Each VSS has a single management IP address.
D. It requires three IP addresses per VLAN.
E. It can eliminate the need for HSRP
Answer:CE

Congrats to all who pass the exam recently.

Can anyone share the latest dumps either Spoto or otherwise please?

My email is bitpiece at virginmedia dot com

Many thanks

BitPiece all the info is here on the thread.. look at mindguy and Eustace posts and you will find them

Got em thanks. My exam is 06/03/17!

I never setup vss, but I remember it needs a cable in between called VSL. VSS can improve unnecessary STP block ports with plain STP rules.

Hi everybody,

Please share Passleader 222 Qs !!! please !!!!
Thanks

Thansk for your input Superkknd..

I dont think you have to put them in the same location.. will be trying that out when I have the opportunity to do so… just for fun of it..

in th mean time.. I playing it safe with the answer.. single ip mgmt and no need for hsrp =)

Those two are correct . I Googled it and documentation said the same.

HI please share update dump i will take exam 4 days
my email is stavel95@gmail

Refer to the exhibit.If router R1 sends traffic marked with IP precedence 3
to R2’s Loopback 0 address.Which class would the traffic match on R2’s
Gi1/0 interface?
A.CM-CLASS-1
B.class-default
C.CM-CLASS-3
D.CM-CLASS-2

correct answer plz
B or D

Which two statements about DMVPN with NHRP are true? (Choose two)
A. NHRP shortens the configuration of the hub router.
B. NHRP dynamically provides information about the spoke routers to
the hub.
C. NHRP disables multicast
D. The hub router uses NHRP to initiate the GRE tunnel with spokes.
E. The spoke routers act as the NHRP servers.
Answer: BD or AB

can anyone tell me

PL have changed the questions from 1315 to 222, are 222 questions valid?