Share your CCIE v5 Written Experience

@Mind_Net

Dont mind my comments but when I read that document, I see a lot of answers that are wrong from question 1. But we know at least the questions so it is for us to look for the right answers.

Thanks again for sharing. There are new stuffs there too.

Thanks mind-net and congrats…

By the way, what’s the answer for the question above?

Does anyone know the cost of the updates spoto files? and do they come in vce format?

@Eustage I have used the VLAD corrections

http://www.filehosting.org/file/details/640470/SPOTO%20dump%20Vlad%E2%80%99s%20corrections_v4.pdf

And made my own correction in others.

@TJ, Yesterday I can find the answer, I have choose “IPv6 on R4” but I don’t if is correct answer.

My recomentation is re-read the blog from page 30, I have found all the links and files in this blog.

@Eustace sorry 😉

@cciedcdc Is your dump still valid and 100% verified?
thanks in advance

@cciedcdc how many questions had in the exam?!

@TJ, Yesterday I can`t find the answer, I have choose “IPv6 on R4” but I don’t know if is correct answer.

@ Mind_Net

Thanks for the second file. I have been reading for 3weeks now and verifying the answers. This second file http://www.filehosting.org/file/details/640470/SPOTO%20dump%20Vlad%E2%80%99s%20corrections_v4.pdf

has the correct answers.

I am now sure of what I have. In-between, I am taking the exam tomorrow so wish me luck.

regards

good luck Mind_Net! I hope you come back here and give us an update.

good luck Eustace! I hope you come back here and give us an update.

Good luck Eustace

Good luck man. Remember that we all are counting that you clear the exams too with that VLAD corrections pdf.

Good Luck Man , Yes we are counting that you clear the exams with VLAD correstion

@eustace please let us know

Just back from writing.

I passed with 841

@Eustace

Wow …!!!!
congratulations
There was news questions or not ???

Everything as per the dumps. NOthing new
Just the choice of answers that might be wrong in some cases. I used the VLAD corrections and still got just 841. And I don’t forget so I think we need better answers. But if you are good in memorizing everything as it is, you will pass but with a shacky score margin.

Congrats Eustace 🙂

@Eustace kindly send the dumps you used to revise. I have downloaded the http://www.filehosting.org/file/details/640470/SPOTO%20dump%20Vlad%E2%80%99s%20corrections_v4.pdf
send to niqsopen gmail com……. Thank you

Eustace,
Really good to know that you cleared the Written man. Congrats. Now only Lab remains to be conquered. This is more a good & bad news. Until we really get another version (nothing in certcollection too), we will go with the VLAD version. What was the required passing score (I hear that passing score varies for every test)?

Is there any page or website or forum similar to rstut for the R&S v5 Lab?

Sent Wesh.

IGood Luck

Eustace,
Sorry for asking this again. But just to re-affirm. The narrowed down 2 pdfs would be the SPOTO (188Q + 21Q) along with the VLAD corrections. Can you kindly confirm again. I have my exam in 2nd week of March. I have prepared much on videos. But would like to revise upon with these PDFs.

Just in certcollection that this is https://drive.google.com/file/d/0B6vYNS8cNxA7d3pXVmZ4ajg2ckE more used & seems to same as the SPOTO (188Q + 21Q). So pasting the link here for quick reference for someone else.

@Eustace
First of all congrats to you!
Kindly send me the dumps which you’ve used to pass the exam … my mail kamalrajshan at gmail dot com

please upload and kindly share the link for valid q’s

Hi Eustace,
Can you please send the dumps you have used?
send it to modathir gmail com
thank you,

@ Network Dummy,

You are right about the 2 pdfs, the first one has 191q +21q and the second the VLAD.

For those who want them by mail, @Mind_Net shared both before. Check his links. They are the best for now and you will pass if you follow both. There isn’t any new questions. All are from there.

Courage to you all and please don’t be afraid to take the exam. Pearson vue also increased the cost form 9th of February so be prepared to spend extra money. I dont know if it is local to my region or it is from CISCO.

So I am looking at this question

Q 8
Which two commands should you enter to enable IP Source Guard with
IP and MAC address filtering?(Choose two)

and the following answers

A.ip verify source tracking
B.switchport port-security
C.ip verify unicast source
D.ip verify source
E.ip verify source port-security
Correct Answer:DE

I agree upon answer D which is how you enable ip source guard..

by issuing the command ip verify source.. I also belive that to filter on a mac you could add in the ip verfify source tracking “mac” so.. answer A..

anyone else have any thought ont this?

Answer : D is for IP only. It asks for IP and MAC address filtering. Answer: F for IP source binding is what I found. (Static filtering)

@ Eustace can you please sen em your Dumps 191q and 21 q as wel as Vlad. i really appreciat eyour help my exame is on Sunday night i really need help if you could my email is
{email not allowed}

. thanks

ausman.kh at gmail

Superkknd I agree that answer D is for IP only,.. but if the are two answers. and the only suggestions you get is A through E..

or am I looking at an older spoto?

Btw congrats Eustace =) doing my test next week.. kinda freaking a bit.. been studying like crazy but finding it to be a lot of New techonlogy questions.. which are in the blueprint.. but where do you read about them.. all?

There is IP verify source tracking. I will pick A.

found this in the vlad corrrection..

2. Which two commands should you enter to enable IP Source Guard with IP and MAC address
filtering? (Choose two)
a) ip verify source tracking
b) switchport port-security
c) ip verify unicast source
d) ip verify source
e) ip verify source port-security

Answer: A,E

so in way it confirs my assement that you need the tracking command to filter on mac.. but here it also says to use E as an answer.. which is wrong.. should be D

My assesment.. is A,D as correct answers..

E IS CORRECT ANSWER.

okie.. googled it.. you are correct Superkknd =)

thanks for your input !

Which three technologies can be used to implement
redundancy for IPv6? (Choose three)
A. IPv6 NA
B. NHRP
C. HSRP
D. DVMRP
E. GLBP
F. IPv6 RA

my think GLBP, HSRP, and NHRP are the answer.

“show ipv6 nhrp nhs redundancy”

any comment?

Q36:
Refer to the exhibit. Which two actions can you take to allow the network
172.29.224.0/24 to be reachable from peer 192.168.250.53? (Choose
two)
A. Modify the community list to match communities 64513:69040
attached to 172.29.224.0/24.
B. Configure soft reconfiguration to peering 192.168.250.53.
C. Modify the outbound route map to permit all additional routes.
D. Configure additional address families to peering 192.168.250.53.
E. Modify the inbound route map to permit all additional routes
F. Modify the community list to match community 64513:64090 attached
to 172.29.224.0/24.

I think the answer is B and F

any comment?

Which IPv4 feature prevents multicast joins on a per-port basis?
A.MLD filtering
B.IGMP snooping
C.IGMP filtering
D.PIM snooping

my answer is: C instead

any comment?

from SPOTO 192q

Which extended ping IP header option allows you to specify one or more
hops over which the packets will travel without specifying the full path?
A.verbose
B.loose
C.strict
D.record

Answer:A…..but for me is C
what do you think?

Q8 in SPOTO dump Vlad’s corrections_v4:

Refer to the exhibit. If the default-information originate always command is configured on R4,
what route type is assigned to the default route in R1’s routing table?

a) O
b) E2
c) O IA <<<<<<
d) E1

If R1 in a Totally Stubby Area, it should not receive any summary LSA from outside. how come the default route on R4 is advertised on R1?

@DDM

B. loose

Verbose is automatically selected along with any other option.
Record is a very useful option because it displays the address(es) of the hops (up to nine) the packet goes through.
Loose allows you to influence the path by specifying the address(es) of the hop(s) you want the packet to go through.
Strict is used to specify the hop(s) that you want the packet to go through, but no other hop(s) are allowed to be visited.
Timestamp is used to measure roundtrip time to particular hosts.

Hello, need a valid dumps for CCIE SP ( 400-201)

Please where is the link for spoto vce format 212Q ?
please share the download link here or to this mailbox
y6wrjycbhmjjyio AT jetable DOT org without spaces.
Thank you.

finally passed using the spoto 212q. the dump is accurate enough to pass the exam.

@maguphe, congrats, thanks for feedback

Any one looking to purchase lab from spoto in UAE I need few people which can purchase with me as I have proper setup in office so any one can do lab simulation wether remotely or he can use it in my office but for that person must be in UAE .

Attention guys .Any one looking to purchase lab from spoto in UAE I need few people which can purchase with me as I have proper setup in office so any one can do lab simulation wether remotely or he can use it in my office but for that person must be in UAE . Spots is looking for 1200 usd for two labs along with solution and I believe 1400 for exam and 1200 for lab CCIE will be very costly