Share your CCIE v5 Written Experience

http://www.zonatsolutions.blogspot.com/p/my-personal-stuff.html?showComment=1486117019688

Ali all stuff is here .

Orga please share your experience after the exam. Eagerly waiting.

Passed today Spoto 136Q still valid , new question and extra!!!Still valid.

anyone is taking exam today? Please share your experience

can anybody please help me with CISSP dump, please.

@joshua

passed today 9xx using 136Q still valid + new questions.

igmp snooping querier
sh ip ospf and no authentication
conditional advertisement
2 statements about DMVPN is true
show ip route
statements about VSS is true
IPv4 feature that prevents mcast joins

dnd
hdlc
ntp
pbr
eigrp otp
stp
netconf
ip broadcast address

thanks fio for the material shared in your google drive.appreciate it

best regards,

Just came back from the exam and got 96x. Spoto and new questions are valid.

New Question:

1.DnD regarding broadcast addresses (Not that difficult)
2.One EIGRP question
router Eigrp X
network 10.0.0.0
stub
(What kind of routes will be advertised). I selected connected and summary.

3. Class map question with subnet mask of le (less or equal to) came up twice. Once with spoto X.X.132.X/X and other time it was X.X.50.X/24 (If I can remember correctly)

Rest was the questions were same.

Good luck to you guys.

@Orga
Thanks a lot for the updates. Preparing for mine in a few days hope to ace it. Guys keep updating once you pass.
Cheers!

Can someone please answer these questions for me correctly as I have my exam tomorrow. I see different options for these in different dump:

Refer to the exhibit. Which statement about the R1 multicast network
environment is true?
A. The default mroute uses Tunnel10 as the next hop for 10.1.108.10.
B. RPF builds the topology using the unicast data for source address
10.1.108.10.
C. A static mroute is configured to point multicast traffic for 10.30.30.30
through Ethernet1/0.
D. RPF uses the OSPF 100 table for source address 10.1.108.10.

Refer to the exhibit. Which routes are advertised by the router?
A. No routes
B. BGP routes from AS 65006 and BGP routes sourced on this router
C. All routes
D. BGP routes sourced on this router
E. BGP routes from AS 65006

Also for the 1 extra DnD question is that the correct order?

otp route-reflector – forms half-mesh…
multicast – default peering method
unicast – use the neighbor statement
otp p2p – use the remote keyword

A. The default mroute uses Tunnel10 as the next hop for 10.1.108.10.

B. BGP routes from AS 65006 and BGP routes sourced on this router

otp route-reflector – forms half-mesh…
multicast – default peering method
unicast – use the neighbor statement
otp p2p – use the remote keyword

Hi Guys,

Passed exam yesterday (February 3) with 9xx. Everything from SPOTO 136Q + New new question are 99% valid. There are about 3 to 4 new questions but very easy to answerable.

How ever waiting to write exam, please go ahead and clear it before exam pool Change.

Thank yo guys for sharing SPOTO questions and your support to achieve me CCIE.

Hey guys passed my exam. Spoto + new questions totally valid

7-8 new questions hurry up

Dears

Well done to those who passed

does anyone have the Spoto + new in pdf format?

I really don’t like prepare using the VCE

I kept searching through the pages and posts and all I found was links to the VCE

could someone help?

I understand what’s meant by Spoto

what do you guys mean by + new questions?

@Talha

I found issues with your link

do you have Spoto 136 + new questions in pdf format

really appreciate your help

Hi All,

I Cleared my exam yesterday Spoto and PL valid to Pass the exam.

Thanks,

Hi Ali,

Congrats,

Please can you share your materials that you used to pass.

Thanks in advance..

what is PL?

Hi
any update about th exam
is the same from spoto136+new question or CISCO changes the questions?
please feedback my exam is tomorrow
thanks,

can anyone have link for all the material required to clear the exam ?

I Passed yesterday the questions was same no any changes in Q’s. Spoto + New Questions+ Extra Questions are enough to pass the exam

Hi guys,
If you clear the exam and come across new questions please share them here and help others pass as well.
Regards,

Passed the exam today with 9XX. Spoto 136Q + Extra Questions + New DnD enough to pass the exam

@Anonymous
Which DnD ??????
Could you describe it please !!!

from where can i get new questions+ extra questions+ new DND ? please?

Please read the previous comments, people have posted the extra questions and new DnD.

Hi Guys, just passed Friday 946/1000 PL 150 Questions are good to pass but you do need to review the PL 1200 that were released before.

please tell me what is the correct answer to this question ?

Refer to the exhibit.R1 is unable to ping the device at 10.3.3.3.Which two
options are possible reasons for the problem?(Choose two.)
A.The static route is configured as a host route.
B.The static route points to a broadcast interface without a next-hop.
C.IP CEF is disabled on the local router.
D.Proxy ARP is disabled on the next-hop router.
E.The dynamic routing protocol configuration is missing.
F.IP CEF is disabled on the remote router.

some saying c and d while some saying b and d.

Hi Toto,
where can find PL150 questions, is it same sas spoto 136 + extra + new Q.

Please help.

John Lewis, it’s B and D.

Thanks

which command can you enter to disable logging for vty lines ?
a)no logging monitor
b)no logging console

please answer

it would be a

John Lewis, when’s your exam?

tomorrow

ok can you let me know how it went as I have mine in Tuesday. good luck. are you using spoto or PL?

yes sure i will , email me @ {email not allowed} to get in touch.
Which one you are using ?
G-man i am using 136 Question,
please msg me at : {email not allowed} if u have PL…..

johnlewis220022 at gmail dot come

am using spoto but see people are on PL.

good luck any how. will you go for the lab soon

please give me link for PL as well

Hi
anybody passes exam today
my exam is afternoon
plz feed me back about any update

thanks in advance

Hi
Spoto 136 and new questions are still valid ? Does anyone confirm me please ? I will take the exam within this week.

@ps hi when u ready for written exam

@tom
may be this tuesday or wednesday.

QUESTION 7
Which statement about the feasible distance in EIGRP is true?
A. It is the maximum metric that should feasibly be considered for installation in the RIB.
B. It is the smallest metric toward the destination encountered …time the destination went from Active tp Passive state.
C. It is the metric that is supplied by the best next hop toward the destination.
D. It is the maximum metric possible based on the maximum hop count that is allowed.

please tell what is correct answer ?
correct answer is B but in cisco books answer is C. what answer should we write ?
please help guys.

ALSO SHARE YOUR EXPERIENCE WHO IS GIVING TEST TODAY

QUESTION 51
Which two statements are true about an EVPL? (Choose two.)
A. It has a high degree of transparency.
B. It does not allow for service multiplexing.
C. The EVPL service is also referred to as E-line.
D. It is a point-to-point Ethernet connection between a pair of UNIs.

Correct answer please? Anyone?

Joshua This question was not in exam i done before 2 days but the answer is C & D.

John Lewis This question was also not in exam but the answer is B.

@Ali, thanks alot

Anybody given exam today ?
please share spoto 136 and new questions still valid ?
please update !

@John Lewis

The correct answer is C. Thats the basic EIGRP principle.