Share your CCIE v5 Written Experience

@Jenny

That is correct about the MPLS D&D

@Anonymous:

Can you please share your reference material with me? Then we can partner up on our lab studies too together.

guys, how i can open the Mega? how is the usurname and password in the VM?

Thanks!

Passed today with 9XX.
100q from itmay8 has 100% of the questions (including OTV). Thanks itmay8 🙂
Some questions have wrong answers, so study the subjects to be able to correct them.

Link for 100q VCE updated:
https:// certcollection . org/forum/topic/327538-ccie-rs-accumulated-keep-updating/page__st__56#entry1295964

@Jenny
Check your email and let me know

Which two statements about dwCEF polarization are true? (Choose two)
A.The ANscD operdwation is performed on the higher-order bits of the source and destination IP address
B.A single link is chodsen for all flows
C.The AdND operation is performed on the lower-order bits of the source and destination IP address
D.After the XOR process, the flow is processed in the distribution Layer with a different hashing algorithm
E.It can be prevented by alternating the hashing inputs F.When enabled, it allows all links to be used efficiently for different traffic flows
Correct Answer: BE

Which statement correctly describes Ansible operations and playbooks?
A.Ansible is agent-based and uses playbooks formatted in YAML
B.Ansible is agentless and uses playbooks formatted in YAML
C.Ansible is agentless and dwuses playwdbooks formatted in XML
D.Ansible is agent-based and uses playbooks formatted in XML
Correct Answer: B

P:pass
H:hot
I used the dump of the PH to pass the exam.

Finally passed the exam this morning.These Dumps are a big help out 100%..

D&D are valid no new one in my exam
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Erase 1 Star***
https:/*/shortify-go.herokuapp.com/1153140011

Just finished my exam and everything from mega is still valid all the same just look for a d&d for otv..good luck

Which two statements about OSPFv3 are true?

A. It supports multicast address families for IPV6 only
B. It supports unicast address families for IPB6 only
C. It supports the use of a cluster ID for loop prevention
D. It supports only one address family per instance
E. It supports unicast address families for IPv4 and IPV6

Hi Ebrahem, please share with me your resources at {email not allowed}

Hi Ebrahem, please share with me your resources at trainf at yahoo.com

Which two statements about EIGRP over the Top feature are true?

A. The neighbor command must be configured with LISP encapsulation on each CE device
B. Traffic is LISP encapsulated on control plane
C. EIGRP routers traffic between the PE devices
D. Traffic is LISP encapsulated on the data plane
E. The network statement must be configured on each PE device to connect separate EIGRP sites

Which three statements about bridge assurance are true? (Choose three.)

A. Bridge assurance must be enabled on both ends of a link.
B. Bridge assurance can be enabled on one end of a link or on both ends.
C. Bridge assurance is enabled on STP point-to-point links only.
D. Bridge assurance is enabled on STP multipoint links only.
E. If a bridge assurance port fails to receive a BPDU after a timeout, the port is put into a blocking state.
F. If a bridge assurance port fails to receive a BPDU after a timeout, the port is put into an error disabled state.

CCIE R&S LAB3 PDF
lee share please

maximuspiratus 90 @ gmail .com

Guys,

can you please help me answering these two?

1) One of your clients, which is in the manufacturing area, is after a solution in order to manage all his fog nodes. Which management tools best suits his needs?

A. Cisco Connected Grid Network Management System
B. Cisco Prime Infrastructure
C. Cisco Network Control System
D. Cisco Fog Director

Looks like it should be “D-Cisco Fog Director,” some say it is ” B-Cisco Prime Infrastructure”. What do you all recommend?

2) what is the default behavior for a manual summary route when a component route of the summary disappears?

a) Regardless of the metric of the component route, the metric of the summary is unchanged to keep stability.
b)if the component route previously had the best composite metric, the metric of the summary changes to the next-best composite metric.

Mostly, I find b as the answer, but some places have listed “A” as the answer too.

Need help.

@Jenny
https://www.cisco.com/c/dam/en_us/solutions/trends/iot/docs/computing-solutions.pdf page 4

Sorry page 5 “Manufacturers manage their fog nodes using Cisco Prime Infrastructure. Administrators use a single interface to manage the network, fog nodes, applications, and users”

Thanks, Panda for the reference. This was really helpful!

Guys “who have taken the exam this July’:

Have you encountered the following Drag and Drop?

1). D&D PADR/PADI

2). D&D BGP Method for refreshing prefixes (Hard and soft reset etc)

3). D&D BGP Priority order (highest weight->lowest MED)

4). D&D BGP attributes (community/cluster list/MED/Atomic)

5). D&D VSS initialization process

6). D&D DHCP messages and ports

can you share the mega link for ccna dumps

can someone share the mega link for ccna dumps

is there any updates

@ adongula
@ trainf
@ ngansop serge
@ moiqba8
@ dearram6655
@ jedix111
@ wave6013
@ dominic brown1030

Check your emails 🙂
good luck

please note that :-
>>>>>> I DONT POST LINKS HERE <<<<<<<<

Guys,
Do anybody know what is User and Password for the CCIE LAB VM from this link ?

https://mega.nz/#!7ixWCARQ!PfEe42IDKS9oY6JkhtwY3JXN7Z4hQ24vCAZPmyt-0Do

Has anyone experienced OSPFv3 LSA D&D recently in the exam?

@Elil:
I am myself stuck at the VM authentication. There is no file that provides this info. Let’s hope somebody responds to this.

Hello Ebrahem,
please can send me also at “{email not allowed}” ?

Hello Ebrahem,
please can you send me also at “nathaliemomo at yahoo.fr” ?

Hello,

can someone have new dumps about CCNP-TSHOOT ?
My mail ist ” nathaliemomo95 at yahoo.fr “

Hello Ebrahem,
please can you send me also at “nathaliemomo95 at yahoo.fr” ?

Hey Guys, Does anyone has this “mega ccie rs lab 3 H3” would like to share?
Thanks.

Guys,

What is the correct answer to this?

Which traffic plane supports the TFTP and FTP protocols?
A. Data Plane
B. management plane
C. control plane
D. Service plane

Is it a management plane or the data plane?

What should be the correct answer?

What is the default behavior for a manual summary route when a component route of the summary disappears?
A. If the component route previously had the best composite metric, the same summary metric is retained
for stability.
B. If the component route previously did not have the best composite metric, the summary metric is updated, and updates are sent to peers.
C. Regardless of the metric of the component route, the metric of the summary metric is updated, and updates are sent to peers.
D. If the component route previously had the best composite metric, the metric of the summary changes to the next-best composite metric.

Is the correct answer C or D?

What is the correct answer, I am lost here.

Which two statements about migrating a network from PVST+ to MST are true? (Choose two)
A. Switches migrated to MST will continues to interoperate with unmigrated switches.
B. Loop guard and BPDU filter are disabled automatically during the migration.
C. While the migration is underway, unmigrated switches treat migrated switches in the MST region as individual switches.
D. Before migrating to MST, all PVST+ switches must first be migrated to Rapid-PVST+
E. Root Guard and BPDU Guard will be unaffected by the migration.

A is for surecorrect, is C the 2nd correct or E?

What is the right answer?

On a network using Diffser, Which option refers to the actions that applied to a packet as it moves through the network?
A. DSCP
B. PHB
C. Core-point
D. IP-precedence

Is it A or B?

Just a quick one, what vce player you’re guys using?

@Elil & @Jenny:
You don’t need the authentication credential, just point your browser to the vm’s IP address.

@Anonymous:

guys, how i can open the Mega? how is the usurname and password in the VM?

Can you please share your reference material with me? Then we can partner up on our lab studies too together.

@Anonymous

maximuspiratus90 @ gmail . com

Finally passed the exam this morning.These Dumps are a big help out 100%..

D&D are valid no new one in my exam
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Erase 2 Star***
https:/*/hec.s*u/jZr6

What should be the correct answer?

What is the default behavior for a manual summary route when a component route of the summary disappears?
A. If the component route previously had the best composite metric, the same summary metric is retained
for stability.
B. If the component route previously did not have the best composite metric, the summary metric is updated, and updates are sent to peers.
C. Regardless of the metric of the component route, the metric of the summary metric is updated, and updates are sent to peers.
D. If the component route previously had the best composite metric, the metric of the summary changes to the next-best composite metric.

Is the correct answer C or D?

Jenny, the answer is B. Its stands for Per Hop Behavior.

What is the right answer?

On a network using Diffser, Which option refers to the actions that applied to a packet as it moves through the network?
A. DSCP
B. PHB
C. Core-point
D. IP-precedence

Is it A or B?

@T.I. seems like it would be DSCP based on the link below,

https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10103-dscpvalues.html

Hi guys I passed the exam two days ago,
The 100q is a good source.

Some wrong answers, but, all the Q came from there

Canuck, I know what it seems to be, but that is incorrect. This statement from the link you provided should help clear things up.
” Other network devices in the core that support Diffserv use the DSCP value in the IP header to select a PHB behavior for the packet and provide the appropriate QoS treatment.”

The DSCP is a means of IDENTIFYING packets that should have a certain ACTION/BEHAVIOR applied to them.

Finally passed the exam this morning.These Dumps are a big help out 100%..

D&D are valid no new one in my exam
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Erase 2 Star***
https:/*/hec.s*u/jZr6

Jenny, the answer is B. Its stands for Per Hop Behavior.

What is the right answer?

On a network using Diffser, Which option refers to the actions that applied to a packet as it moves through the network?
A. DSCP
B. PHB
C. Core-point
D. IP-precedence

Is it A or B?

@T.I:
Thanks a lot for the validation.

What about these three?

1) Which traffic plane supports the TFTP and FTP protocols?
A. Data Plane
B. management plane
C. control plane
D. Service plane

Is it a management plane or the data plane?

2) What is the default behavior for a manual summary route when a component route of the summary disappears?
A. If the component route previously had the best composite metric, the same summary metric is retained
for stability.
B. If the component route previously did not have the best composite metric, the summary metric is updated, and updates are sent to peers.
C. Regardless of the metric of the component route, the metric of the summary metric is updated, and updates are sent to peers.
D. If the component route previously had the best composite metric, the metric of the summary changes to the next-best composite metric.

Is the correct answer C or D?

3) Which two statements about migrating a network from PVST+ to MST are true? (Choose two)
A. Switches migrated to MST will continues to interoperate with unmigrated switches.
B. Loop guard and BPDU filter are disabled automatically during the migration.
C. While the migration is underway, unmigrated switches treat migrated switches in the MST region as individual switches.
D. Before migrating to MST, all PVST+ switches must first be migrated to Rapid-PVST+
E. Root Guard and BPDU Guard will be unaffected by the migration.

A is for sure correct, is C the 2nd correct or E?

I keep reading here that people are reporting they encountered “BGP best path selection criteria and ipv6 to Ipv4.”

Which ipv6 to ipv4 are they talking about? The D&D about 6RD, ISATAP, etc?

Which BGP best path selection criteria are they talking about? BGP features of peers/sessions etc or the one with weight, local-pref, originated path, AS-PATH, origin-type, MED???

Hi NED,

I have set Custom VMware network adapter and configured an ip address
Unfortunately i get IIS Default Page when trying to open a browser.

Can you please give more explanation about how to open Mega labs ?

Thanks