Share your CCIE v5 Written Experience

@Ebrahem

It would be a great help if you could send me a copy of your latest dump.

jonno824 @ outlook com

Many thanks,
Jonno

@Albert

Today I take exam 400-101. Pass 972. Good inversion.

Ebrahem, please send me the dump
shota.ryuta2 @ gmail dot com

Hi dears @Elshaday G. and Ebrahem
Would you please share the dumps you used with me? vampire.dark @ outlook.com
Thanks so much in advance.

@Ebrahem
I see you have the latest on the written dumps Do you happen to have any info for the lab exam you could share? I’ve already passed the written about 10 months ago and lost track of the lab info.

Thank you in advance.
ddag1401 @ yahoo com

@Ebraham

My apologies please send to kdallas19 at Yahoo dot com

Autocorrect dropped the 19 from original post.

Please send thank you kind sir!!

kindly send the latest dumps {email not allowed}

kindly send the latest dump mparacha1021 at yahoo dot com

Ebrahem, could you send it to me as well please? 🙂
queenlucy252 @ gmail dot com

hey Ebraham,

please could you share me the latest dump? Thanks in advance.

balbyinfor03 at gmail dot com

regards!

Done my test and get 96X/1000

D&D are valid no new one in my exam
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without Stars**
http:/*/ow*.ly/2NXB101z3Nk

3. Which two reasons for IP SLA tracking failure are likely true? (Choose Two)

A. The source-interface is configured incorrectly.
B. The destination must be 172.30.30.2 for icmp-echo.
C. A route back to the R1 LAN network is missing in R2.
D. The default route has wrong next hop IP address.
E. The threshold value is wrong.
Correct Answer: BE or AC
****************************

The source interface should be reffer to the exhibit Fa 1/0.
so A is a good answer.

We see that the subnet is 172.20.20.0/30, we dont need to a default route because the network is connected with cost 0.
Default route is used for last ressort. So we dont need to response D

I think that in router R2, there is shorter prefix like 172.20.20.2/32 and if it is the case, I think that it should have a route to the 172.20.20.0/30.

4. I would rather go with AC

Hi Ebraham,

Can you please send ittadikaje at gmail dot com. If Ebraham is not checking the blog anymore can anyone else forward as I believe Ebraham forwarded to many of you guys. Thank you so much in advance.

Hi Guys,

if you need CCIE RS dump valid and stable
contact me drupal.biru @ gmail. com
I will provide the dumps for minimal price to you
Please let me know
It’s not scam

Hi Ebraham. Can you please share the dumps with me at mynerazuri @ gmail dot com. I will be having my exam next week. thanks apreciate

Hi Ebraham,

could u please share the latest dump pavanchaudhari1978 at gmail.com

Hello brother ebrahim can you please share the latest dumps to me on my email : mustafa.adroit @ gmail com . Stay healthy .
Thanks & regards

I took exam CCIE R&S written and passed today , scored 9xx . I really appreciate the help given by Ebrahem . The material 98q & 100 Q he shared by email is 100 percent valid and enough to pass this exam. I again thanks to Ebrahem and some others ppl on this forum.
Good lucks .

@Ebrahem

Please share me the dumps.
ccieget75 at gmail

Passed too

https://share.riseup.net/#a7dGA0KcRdtJB5OK-eEcYg

Could you please share the dumps: cciestudy90210 at outlook dot com

@ ccieget75
@ mustafa adroit
@ pavanchaudhari1978
@ mynerazuri
@ tadikaje
@ balbyinfor03
@ queenlucy252
@ kdallas19
@ vampire dark
@ jonno824
@ khadim diouf
@ vampire dark
@ tettehsamuel1986
@ Sameera7788
@ forenaccount8
@ jafehiss
@ slerochet
@ mohdreduan
@ slerochet
@ granollagranolla
@ nezblack
@ lopes h92

Check your emails 🙂
good luck

@all guys
>>>>>> I DONT POST LINKS HERE <<<<<<<< there is someone using my name and posting FAKE links

@Ebrahem

please share the dumps: cciestudy90210 at outlook dot com

Ebrahaem – could you please share the dumps to cciestudy90210 at outlook dot com

Hello,

I passed the exam today (985/1000), I got :

– D&D are valid no new one in my exam
– BGP best path selection criteria
– ipv6 to Ipv4 , MPLS PHP

All the questions were from this dump (Updated this month with the new questions)

https://flipflashpages.uniflip.com/3/615828/1103728/pub/html5.html

pssed rs 950 follow the link:
examclubs .com

I passed today 944/1000 with 90 questiona and the passing 804. the new dump version 10.041 are valid. some drag and drop questions added from old dump.

Which two statements about the Cisco Express Forwarding glean adjacency type are true? (Choose Two)
A. the router FIB table maintains a prefix for the subnet instead of individual hosts.
B. Packets destined for the interface are discarded and the prefix check is skipped
C. Packets destined for the interface can be dropped. Which provide a form of access filtering?
D. the adjacency database is used to gather specific prefixes when packets are destined to a specific host
E. Packets destined for the interface are discarded and the prefix is checked

—
Which two statements about this CoS mapping are true?
wrr-queue cos-map 1 2 2 3
Refer to the exhibit. Which two statements about this CoS mapping are true? (Choose two)
A. It maps the second queue and first threshold to CoS 3.
B. It maps CoS values to the transmit queue threshold.
C. It maps the second queue and first threshold to CoS 2.
D. It maps the first queue and first threshold to CoS 2 and CoS 3.
E. It maps the second threshold to CoS 2 and CoS 3.
—-
When the BGP additional-paths feature is used, what alows a BGP speaker to differentiate between the different available paths?
A. The remote BGP peer prepends its own next-hop address to the prefix
B. A route distinguisher is appended to the prefix by the receiving BGP speaker
C. A unique path identifier is encoded into a dedicated field to the NLRI
D. The additional path information is encoded in an ectended community
—
Which two statements about 6PE are true? (Choose two)
A. It does not require MPLS between the PE routers.
B. It requires BGP to exchange labeled IPv6 unicast between PE routers.
C. It requires a VRF on the IPv6 interface.
D. Uses an IPv4 mapped IPv6 address as the IPv4 next hop on PE router
E. iBGP peering between the PE routers should be done using an IPv6 address.
—
Which two statements about root guard and loop guard are true? (Choose two)
A. Loop guard uses its own keepalives to determine unidirectional traffic.
B. Loop guard uses its own keepalives to prevent loops by detecting failures.
C. Loop guard uses BPDU keepalives to determine unidirectional traffic.
D. Root guard should be enabled on an upstream interface.
E. Root guard disables an interface only when a superior BPDU is received
F. When loop guard is enabled, the port is transitioned to the root-inconsistent state.
—
According to the networking best practices, which network device should be used for optimization and rate limiting?
A. the provider core device
B. the provider edge device
C. the customer core device
D. the coustomer edge device

—-
Which two items must be confined to caputure packet data with the Embedded Packet Caputure feature?(Choose two)
A. the capture point
B. the capture buffer
C. the coputure file export location
D. the caputure filter
E. the capture rate
F. the buffer memory size
—
Which three options are the main security features in SNMPv3? (Choose three)
A. authentication
B. MIB persistence
C. message integrity
D. authorization
E. encryption
F. accounting

Refer to the exhibit. Which two statements about this topology are true? (Choose two)

A. Destination 192.168.23.0/24 is unable to use interface Fa0/1 as the LFA.
B. Interface FastEthernet 0/1 is the primary path to destination 192 168.23.0/24.
C. The FastEthernet 0/0 and FastEthernet 0/1 interfaces are used as LFA for destination 192.168.23.0/24
D. Only interface FastEthernet 0/1 are used as the LFA for destination 19216823.0/24.
E. Interface FastEthernet 0/0 is the primary path to destination 192.168.23.0/24.
F. Only FastEthernet 0/0 is used as the LFA to destination 192.168.23.0/24.
—
What is the source MAC address of a BPDU frame that is sent out of a port ?
A. A the lowest MAC address on the switch
B. the higest MAC address on the switch
C. the MAC address of the individual port that is sending the BPDU
D. the same as the MAC address in the brigdge ID
—-
Which two statements about 6to4 tunnels are true? (Choose two.)
A. They encapsulate IPv6 packets, which allows the packets to travel over IPv4 infrastructure.
B. They support point-to-multipoint traffic.
C. They support OSPF and EIGRP traffic.
D. They support point-to-point traffic.
E. They allow IPv4 packets to travel over IPv6 infrastructure without modification.
F. They generate an IPv6 prefix using a common IPv4 address.
—
Which two statements about redistribution are true? (Choose two)
A. When BGP traffic is redistributed into OSPF eBGP and iBGP routes are advertised.
B. When EIGRP routes on a CE are redistributed through a PE into BGP, the Cost Community POI is set automatically.
C. When EIGRP traffic is redistributed into BGP, a default metric is required.
D. When BGP traffic is redistribute into OSPF the metric is set to 1 unless the metric is defined.
E. iBGP routes automatically redistribute into IGP if the routes are in the routing table.
F. When OSPF traffic is redistributed into BGP internal and external routes are redistributed.
—-
Which two OSPF network type require the use of a DR and BDR? (Choose two)
A. non-broadcast networks
B. point-to-point networks
C. point-to-point non-broadcast networks
D. broadcast networks
E. point-to-multipoint networks
—
Which three message type are used for prefix delegation in DHCPv6?(Choose three)
A. Solicit
B. Renew
C. Advertise
D. DHCP Discover
E. DHCP Ack
F. DHCP Offer
——–
Refer to the exhibit. Which two statements about the 192.168.23.0/24 prefix are true? (Choose two.)

A. Router 192.168.45.4 cannot act as a feasible successor.
B. Router 192.168.35.3 is the only successor.
C. Only router 192.168.45.4 is a feasible successor.
D. Routers 192.168.35.3 and 192.168.45.4 are successors.
E. Routers 192.168.35.3 and 192.168.45.4 are feasible successors.
F. Only router 192.168.35.3 is a feasible successor.
—
Refer to the exhibit, which statement is true?

A. BFD, SPF and LSA timers are tuned for faster convergence
B. Fast convergence is not configured
C. BFD and SPF throttling are configured
D. Only BFD is enabled
—
Which feature can you implement to most effectively protect customer traffic in a rate-limited WAN Ethernet service?
A. HCBWFQ
B. IntServ with RSVP
C. DiffServ
D. The IPsec VTI qos pre-classify command
E. Q-in-Q
—
You are configuring CoS-to-DSCP mappings with three requirements:
– AF13 must be marked with COS 1.
– AF22 must be marked with COS 2.
– EF must be marked with COS5.
Which configuration command can you use to implement the requirements?
A. mls qos map cos-dscp 0 14 20 24 32 46 48 56
B. mls qos map cos-dscp 0 10 18 24 32 46 48 56
D. mls qos map cos-dscp 0 12 18 24 32 46 48 56
C. mls qos map cos-dscp 0 12 18 24 32 40 46 56
—
Which two statements about BGP confederation architecture are true?
A. The intraconfederation EBGP default TTL value between sub-ASes is 1
B. The AS_SET and AS_SEQ components help prevent loops inside a sub-AS
C. The ASN of a confederation is excluded from the AS_PATH path length calculation
D. The intraconfederation EBGP default TTL value between sub-ASes is 255
E. IBGP sessions inside a sub-AS have a default TTL of 1
—
Refer to the exhibit. Which option describes the purpose of the as-set argument of the aggregate-address command?

A. it provides an AS path in the aggregate advertisement that contains only the local AS number.
B. It provides a predefined AS path in the aggregate advertisement that is used to indicate an aggregate prefix.
C. It provides an AS path in the aggregate advertisement that includes the AS numbers of the component members.
D. It provides a list of AS numbers top which the aggregate is advertised.
—
How does MSTP maintain compatibility with RSTP?
A. The system ID of an RSTP BPDU is padded with extra bytes to match the format of an MSTP BPDU.
B. RSTP encodes region information from an MSTP BPDU into a single instance.
C. MSTP sends all spanning-tree information in one BPDU.
D. RSTP implements a TTL that is compatible with the MSTP max age timer.
E. MSTP supports five port states in the same way as RSTP.
—-
Which two statements about Cisco Express Forwarding are true? (Choose two)
A. The FIB table and the adjacency table reside on the line cards when distributed Cisco Express Forwarding is enabled.
B. Layer 2 next-hop address information is maintained in the adjacency table.
C. The FIB table and the adjacency table reside on the line cards when Cisco Express Forwarding is enabled.
D. Layer 2 next-hop address information is maintained in the FIB table.
E. The FIB table resides on the route processor and the adjacency table resides on the line cards when Cisco Express Forwarding is enabled.
—
Which two values are required to implement an EIGRP named configurations? (Choose two)
A. address-family
B. process-id
C. subnet-mask
D. virtual-instance-name
E. router-id
—
Which two statements about Cisco IOS XE are true? (Choose two)
A. Separate images are required for platform-dependent code.
B. Its functions run as multiple separate processes in the OS.
C. It uses a service blade outside Cisco IOS XE to integrate and run applications.
D. It is deployed in a Linux-based environment.
E. The FED feature provides separation between the control plane and the data plane.
—
Drag and drop each BGP attribute on the left into the priority order in which the attributes are preferred when determining the best path on the right.

ANS

—-
Refer to the exhibit. Which two statements about this CoS mapping are true? (Choose two)

A. It maps the second queue and first threshold to CoS 2.
B. It maps the first queue and first threshold to CoS 2 and CoS 3.
C. It maps CoS values to the transmit queue threshold.
D. It maps the second threshold to CoS and CoS 3.
E. It maps the second queue and first threshold to CoS 3
—
Which two statements about VPLS are true? (Choose two)
A. The service provider proviaxsions CE devices.
B. It transmits broadcast traffic more efficiently than Ethernet switches.
C. It uses broadcast replication to transmit Ethernet packets with multicast MAC addresses.
D. It enables CE devices to operate as part of an L3 VPN.
E. It enables CE devices on different networks to operate as if they were in the same LAN.
F. It enables PE and CE devices to operate as if they were routing neighbors.
—
Which two options describe the effect of configuring an interface as passive under OSPF? (Choose two)
A. An adjacency cannot be established, and the interface is not included in the routing protocol update.
B. The interface processes OSPF hello packets but does not send hello packets.
C. An adjacency cannot be established, and the interface is included in the routing protocol update.
D. The interface processes OSPF hello packets and also sends hello packets.
E. An adjacency can be established, and the interface is not included in the routing protocol update.
—
Which two discovery mechanism does LDP support? (Choose two.)
A. strict
B. extended
C. loose
D. targeted
E. basic
—-
How does MSTP provide backward compatibility with RSTP?
A. It uses the hop count variable as a TTL counter.
B. It transmits all spanning-tree information in one BPDU.
C. It supports up to 128 MSTI messages.
D. It encodes the MSTP-specific region information before the legacy RSTP BPDU.
—

Done my test and get 916/1000

D&D are valid no new one in my exam
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

Without Stars**
http:/*/ow*.ly/2NXB101z3Nk

How does MSTP maintain compatibility with RSTP?
A. The system ID of an RSTP BPDU is padded with extra bytes to match the format of an MSTP BPDU.
B. RSTP encodes region information from an MSTP BPDU into a single instance.
C. MSTP sends all spanning-tree information in one BPDU.
D. RSTP implements a TTL that is compatible with the MSTP max age timer.
E. MSTP supports five port states in the same way as RSTP.
—-
Which two statements about Cisco Express Forwarding are true? (Choose two)
A. The FIB table and the adjacency table reside on the line cards when distributed Cisco Express Forwarding is enabled.
B. Layer 2 next-hop address information is maintained in the adjacency table.
C. The FIB table and the adjacency table reside on the line cards when Cisco Express Forwarding is enabled.
D. Layer 2 next-hop address information is maintained in the FIB table.
E. The FIB table resides on the route processor and the adjacency table resides on the line cards when Cisco Express Forwarding is enabled.
—
Which two values are required to implement an EIGRP named configurations? (Choose two)
A. address-family
B. process-id
C. subnet-mask
D. virtual-instance-name
E. router-id

@anonymous

Great aports. Thnk. Valid questions.

@Ebraham could you please share dump theratloves007 @ gmail . com <— all one word.

@Ebrahem
Could you please share dumps at jack.smih080613 at gmail dot com

Can’t type apparently
@Ebrahem
Could you please share dumps at jack.smith080613 at gmail dot com

@Ebrahem

please share the dumps: you932021 at gmail dot com with no spaces.

Ebrahem fake fake….

Don’t use Ebrahem fake fake dumps

just passed the exam.
evedumps. com

+1 740 212 6574

Hello Everyone

CCIE R&S 400-101 Exam fee Discount Voucher Available

100% Discounted Voucher

Interested People Contact

Wht^sA^pp Number.
+1 740 212 6574

Refer to the exhibit. Which two statements about this CoS mapping are true? (Choose two)

A. It maps the second queue and first threshold to CoS 2.
B. It maps the first queue and first threshold to CoS 2 and CoS 3.
C. It maps CoS values to the transmit queue threshold.
D. It maps the second threshold to CoS and CoS 3.
E. It maps the second queue and first threshold to CoS 3
—
Which two statements about VPLS are true? (Choose two)
A. The service provider proviaxsions CE devices.
B. It transmits broadcast traffic more efficiently than Ethernet switches.
C. It uses broadcast replication to transmit Ethernet packets with multicast MAC addresses.
D. It enables CE devices to operate as part of an L3 VPN.
E. It enables CE devices on different networks to operate as if they were in the same LAN.
F. It enables PE and CE devices to operate as if they were routing neighbors.
—
Which two options describe the effect of configuring an interface as passive under OSPF? (Choose two)
A. An adjacency cannot be established, and the interface is not included in the routing protocol update.
B. The interface processes OSPF hello packets but does not send hello packets.
C. An adjacency cannot be established, and the interface is included in the routing protocol update.
D. The interface processes OSPF hello packets and also sends hello packets.
E. An adjacency can be established, and the interface is not included in the routing protocol update.
—
Which two discovery mechanism does LDP support? (Choose two.)
A. strict
B. extended
C. loose
D. targeted
E. basic

any idea about dump validity period? thanks

just passed the exam.
thx passhot dot com

This is the valid dump. I passed mine yesterday. All the questions are from this dump. Thanks.
passhot.com

Hello everyone. I already passed one ccie certification exam couple of months ago without using any dumps. But it took a lot of time and efforts really. This time i try to use dumps as im very busy at work. I didn’t expect that I can passed the CCIE RS written test in one week. The accuracy of passhot is very high!
link: passhot.com

have a good time

Recommend a website that is trustworthy CCNA CCNP exam materials, the materials are stable and effective, any updates before the exam will be provided free of charge, so you can ensure that users use the latest dump to take the exam.

Thanks for sharing!

Luckily passed the 400-101 exam on 3/May/2019.

Questions are all available in that new PassLeader 400-101 dumps, just few answers are not same as the actual 400-101 test.

Thanks for updated PassLeader 400-101 dumps, helpful!

Good luck, all!

@Ebrahem, please share latest dump at hman18564 at gmail dot com

many thanks!

Hi, Ebrahem!
Could you share the CCIE dump please?
anorev101 @ yahoo . co. nz

Can anyone share the latest written dumps.

{email not allowed}. I will really appreciate it.