Share your CCIE v5 Written Experience

http s://docs.google.com/document/d/1KQZDbpoxq_BZ6bmUD7slcVovBEZBPC3fdTyvw4kqlvY/edit?usp=sharing
Recommend an effective and useful place.

Hi Ebrahim
Sorry here please here is my email slerochet at gmail dot com
There is mistake in the formal address

123

I recommend you to check it out, maybe it will help you.

I recommend you to check out this dump, maybe it will help you with the exam.

@Ebrahem,

Please share dumps.

jamshoney00@ gmail . com

Thanx a lot.

https://www.blogger.com/blogger.g?blogID=1642699717238539117#editor/target=post;postID=6724161181030494236;onPublishedMenu=allposts;onClosedMenu=allposts;postNum=0;src=postname
I recommend you to check out this dump, maybe it will help you with the exam.

Hi Ebrahme,
pls consider me to send you latest dump

{email not allowed}

thank you in advance

@Ebrahem,

Please share dumps.

suraj.bhattacharya54@ gmail .com

Thanx a lot

@Ebrahem,
Please can you share the dumps.
Thank you very much

bibosibibi @ gmail . com

@Ebrahem,
pls share the latest q on mkool187 at hotmail dot com
Thank you

could please share latest dump. My email {al38ab1993 at gmail dot com} Thanks

passed the rs exam 90 qs

evedumps. com

@ebrahem, could please share latest dump, thanks.
mail: petesobamel at hotmail com
thank you

please share 100 questions dumps
usamaqaisar321 @ gmail . com

Have any one cleared the exam with Mr.ebrahem’s dumps, Kindly confirm. TIA

@Ebrahem
could you please share to {email not allowed}

Thanks a lot

@Ebrahem
could you please share to mmasohel at gmail . com

Thanks a lot

@Ebrahem

could you could you please share to
mhdhory at gmail . com

Thanks a lot

h

ttps://docs.google.com/document/d/1Mi3M5VRqIJWD7djvZ6DNCLNxInH_azeQ-t2xqSnDvtw/edit?usp=sharing

123

The really reliable CCNP exam problem helped me pass the exam

@Ebrahem
Could you please share the dumps for 400-101
PLease share to mostaque444 at gmail

Hi Ebrahem,

Please send me the new dumps to julyaugust21@ yahoo.com
Thanks

mia.koning 12392 @ gmail. com

Please send me a latest dump.
thank you

can you please send me the latest dump to itd.sensei at gmail dot com ? Thank you very much!

TACACS+ do not encrypt header
and do multiprotocol suport like appletalk
https://www.cisco.com/c/en/us/support/docs/security-vpn/remote-authentication-dial-user-service-radius/13838-10.html

@ maximuspiratus90
@ itd sensei
@ mia koning12392
@ julyaugust21
@ mostaque444
@ mhdhory
@ mmasohel
@ usamaqaisar321
@ petesobamel

check your emails 🙂

Hello Ebrahem, could you please share the dump? Thanks a lot!

terofs @ gmail.com

Ebrahem

could you could you please share to
mhdhory at gmail . com

Thanks a lot

Dear Brother i have cleared the written exam of Routing and Switching.
if anyone interested for written dumps he can send me email
mr_khan_it @ yahoo .com

@Khan. Salam Sir,
Can you please send me dumps of CCIE R&S at my email hamudurrehmangr8 @ gmail . com.
Thanks “

Hi there Done test with 912
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

https:/*/shor*t1.link*/TWBP3z

@ mhdhory
@ terofs

check your emails 🙂
good luck

(updates 21-Feb) some friend sends me the new dump 100q. anyone wants it just post his email here.
good luck

Ebrahem

could you please share new dump 100q to etieneric @ gmail . com

thx

Q78
which pim feature allows the same multicas group address to be reused in different administrative domains?

B – ip multicas helper
C – ip multicas bounbdary

Correc answer: B

I think should be C

“…using theip multicast boundary command… The boundary allows the same multicast groupa ddress to be reused in different administrative domains.
”
source
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/16-3/configuration_guide/b_163_consolidated_3850_cg/b_162_consolidated_3850_cg_chapter_011001.pdf

Hi there Done test with 912
BGP best path selection criteria
ipv6 to Ipv4 , MPLS PHP

https:/ /sh ort1.link /TWBP3z

Q1
which values must be defined an EPC packet capture? (choose two)

B – captute point
D – buffer name
E – buffer size

Answer: BE

but as you see buffer size is not mandatory but buffer name is

R1#monitor capture buffer TESTBUFF ?
circular Circular Buffer
clear Clear contents of capture buffer
export Export in Pcap format
filter Configure filters
limit Limit the packets dumped to the buffer
linear Linear Buffer(Default)
max-size Maximum size of element in the buffer (in bytes)
size Packet Dump buffer size (in Kbytes)

R1#sh monitor capture buffer all parameters
Capture buffer tito (linear buffer)
Buffer Size : 1048576 bytes, Max Element Size : 68 bytes, Packets : 0
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Configuration:
monitor capture buffer tito
Capture buffer TESTBUFF (linear buffer)
Buffer Size : 1048576 bytes, Max Element Size : 68 bytes, Packets : 0
Allow-nth-pak : 0, Duration : 0 (seconds), Max packets : 0, pps : 0
Associated Capture Points:
Configuration:
monitor capture buffer TESTBUFF

a502375 @ yahoo . com
I would like the new 100Q dump. thank you very much

@Ebrahem

Please send me the new 100q dump ::: 44 sole @ gmail .com

@pt,

from the link provided in explanation (https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/epc/configuration/15-mt/epc-15-mt-book/nm-packet-capture.html)
, we can see:

– “The network administrator *may* define the capture buffer size and type” (note “may”, not “should” or “must” or “have to”. “May” means it is optional)
– in the command reference (SUMMARY STEPS, step2):

monitor capture buffer buffer-name [clear | export export-location | filter access-list {ip-access-list | ip-expanded-list | access-list-name} | limit {allow-nth-pak nth-packet | duration seconds | packet-count total-packets | packets-per-sec packets} | [max-size element-size] [size buffer-size] [circular| linear]]

Note how “buffer-name” is the only requirement, while everything else (in brackets) is optional, including the buffer-size.

Therefore, the correct response is: B, D

SUMMARY STEPS
1. enable
2. monitor capture buffer buffer-name [clear | export export-location | filter access-list{ip-access-list | ip-expanded-list | access-list-name} | limit {allow-nth-pak nth-packet | duration seconds | packet-count total-packets | packets-per-sec packets} | [max-sizeelement-size] [size buffer-size] [circular| linear]]
3. monitor capture point {ip| ipv6}{cef capture-point-name interface-name interface-type{both | in | out}| process-switched capture-point-name {both| from-us| in | out}}
4. monitor capture point associate capture-point-name capture-buffer-name
5. monitor capture point start {capture-point-name | all}

Hi Ebrahem

could you please share new dump 100q , butikalu @ gmail com

Hi Ebrahem,

Can you send me the new 100q dumps please?

Thanks a lot

Hi Ebrahem,

Can you send me the new 100q dumps please?
Email : yns4969bkn@ gmail .com

Thanks a lot

@ Ebrahem please send me the 100q dumps to rxmani11 at gmail dot com , Thanks in advance

@ Ebrahem please send me the 100q dumps and the 205 to rxmani11 at gmail dot com , Thanks in advance

@Krag
thaks

Please let me know can we directly proceed for CCIE? actually my CCNP expired and now want to go CCIE is it possible? or need entry level certification again?

Hi Ebrahem,

Can you please email the latest 100q dump to: mrice001 @ protonmail.com?

Thank You

Hi Ebrahem,

Could you please email the latest 100q dump to: johnsmit4er @ gmail.com?

Thanks!