Share your CCIE v5 Written Experience

@Jonas Hanke

@ Ehrahem .

Could you mail me the 103 Q dumps which i assume is Valid as per the above comments.

omerzalmai at gmail.com

@ Omer Zalmai

dont believe anyone says the dumps are not valid to sell his dumps , dont follow the spammers . i’ve juse passed the exam myself some days ago
also some one has passed the exam on 2 jan 2019 using same dumps. he sent me his passing report
268q one contains all other dumps, the latest one (100Q) contains some new questions.
on the other hand i dont think there is a dump named 103 , the dumeps i know is 102 106 126 250 268 and 100 which is the latest one.
keep checking the new questions which posted here and read my previous comments

dont hesitate , study those dumps and go take ur exam 🙂

good luck 🙂

Huawei Written and Lab Vouchers are now available

HCNA HCNP 60$ each
HCIE Written + 2 Labs for 800$ Only

Someone interested can reach me at sher123jannatgmaildotcom

@Ehrahem

Please share me to my mail: {email not allowed}

@Ehrahem
Mi mail is camp_mar17 at hotmail.com

Guys
this one ( Anonymous ) try to copy my words and give a credit to the other spammer ( Dumps Link) , dont believe both

even if anyone use my name dont believe him,
anyone askes for money or to call a phone number dont believe him.
anyone says the dumps are not valied or the exam has changed dont believe him
in every each there is from 5 to 15 new questions
again any one use my name and ask you for money or anything else dont trust him.
i dont ask for anything . anyone wants the dumps just write his email here or send me at my email ebrahemmomen @ gmail . com

Good luck 🙂 🙂

@Jonas Hanke

GREAT!

Would you like to upload that 103q PassLeader 400-101 dumps?

Thanks in advance!!!

+1

+1

@Jonas Hanke

GREAT!

Would you like to upload that 103q PassLeader 400-101 dumps?

Thanks in advance!!!

+1

+1

+1

Please help to confirm dump

This dump valid or not https:/*/go*o.g*l/bQsjxX

Any one here help me for CCIE collab written exam!!!

@Jonas Hanke

GREAT!

Would you like to upload that 103q PassLeader 400-101 dumps?

Thanks in advance!!!

+1

+1

+1

+1

Passed the 400-101 exam today (8/Jan/2019)!

917/1000 marks!

Learning that PassLeader 103q 400-101 dumps.

Dumps is 100% accurate!

Those who are preparing for the 400-101 test, recommend to learn PassLeader and take exam ASAP!

Good luck!

Hi Ron,

Congrats.. Could you please share the 400-101 103 Q dumps to my mail iD
sankar.narayan8787 @ gmail.com

Thanks in advance
Sankar

@Ronaldo Tolentino

WELL DONE!

Please kindly upload that 103q PassLeader 400-101 dumps.

We all need that 103q PL 400-101 dumps now.

Thanks in advance!!!

Thanks in advance!!!

Thanks in advance!!!

Question

With PBR and set ip next-hop configured on an incoming interface, how does the router forward the packet with the next-hop being unreachable?
A. The packet is forwarded using the normal routing table
A. The next hop is added to the route table and the packet is policy routed
B. The packet is policy routed
D. The packet is dropped
Answer: D
Other Dumps Answer is A

Those who passed what ware your answers? A or D ?

@Anonymous

Answer is: A. The packet is forwarded using the normal routing table

@Ebrahem Could you please send me PDF dumps also ? 🙂 –> gaetangmg @ yahoo . fr
Thanks a lot !

Congrats.. Could you please share the 400-101 103 Q dumps to my mail iD
{email not allowed}

Congrats.. Could you please share the 400-101 103 Q dumps to my mail iD

bouzid17 @ gmail . com

Hi,
Please share with me the last dump !!!!!

“mlimouni82 @ gmail.com”

Thank you.

@Ebrahem

Congrats.. please share the dump

mlimouni82 @ gmail.com

Please please !!!

@ camp_mar17
@ sankar.narayan8787
@ mlimouni82
@ bouzid17
@ gaetangmg
@ sergeykorshun0ff
@ bongi32
@ cciersproject2019
@ lj.camp.m
@ manojariyarathna
@ samuelxtan

check your emails 🙂

good luck

@Ronaldo Tolentino

WELL DONE!

Please kindly upload that 103q PassLeader 400-101 dumps.

We all need that 103q PL 400-101 dumps now.

Thanks in advance!!!

Thanks in advance!!!

Thanks in advance!!!

+1

Hi guys

i’ve uploaded all the dumps i have , its easier for me 🙂 , those are (102q,106q,126q , 250q , 268q)wich i’ve used to pass the exam.along with the new one 100Q dates on 2019-1

note that there are WRONG answers in all of those dumps , try to check them yourself, I’ve uploaded what i’ve checked myself , i didnt check all the dump. i hope that would help.

I advice to keep checking the rstut.com for the new quesions because i see some of the new questions i’ve got in my exam.

dont hesitate and go take the exam . also dont believe anyone says the dumps are changed, because the dumps will not changed at all , but Cisco adds a new questions to the same dump from time to time, so study those dumps and the new questions.
also dont believe who says the dump is 100% valid , you always will find new questions in each exam.
by the way , use latest version of WinRAR to extract the files

Good luck

mediafire . com/file/x1x875bc4ue643b/ebrahem . rar/file

@ Ebrahem

Thank you Lot !!!

@@ Ebrahem you are a good men god bless you

hello
Congrats Ebrahem. Could you please share the 400-101 103 Q dumps to my mail iD

-> elrmanu @ hotmail .es

@ all guys

***** some one uses my name and copy my words and make a FAKE file by my name*******
the first like is mine ,
but this one is FAKE
—>>>> mediafire . com/file/zob6nbmiq5252my/ebrahem . rar/file <—

this is very stupid !!! they still try to cheat others !! to trying to sell their dumps

anyway, anyone wants the dumps i'll send FOR FREE all the time. contact me via email
or write your email here.
my email is ebrahemmomen @ gmail . com

good luck and just ignore the spammer

Passed the 400-101 exam few hours ago! 9xx/1000 !!

I only learned that PassLeader new 103q 400-101 dumps.

100% accurate, all questions were from PL!

Trying the PassLeader 400-101 dumps ASAP, all guys!

Good luck!

@Ebrahem
Hey mate could you please share the latest dump with me as well , many thanks in advance.

Regards

Thilina

thilinapm @ gmail .com

@ Adam Wrzoskowicz
Please share with me the last dump !!!!!

“likhit52 @ hotmail.com”

Thank you.

@Adam Wrzoskowicz

Congratulations!!!

Please share that PassLeader 400-101 dumps with 103q with me.

Daniel Pasono @ gmail com

Thanks in advance!!!

Anyone knows where I can get CCIE v5 Security dumps .

Is the 103 PL a VCE OR pdf?

@ Adam Wrzoskowicz
Please share with me the last dump !!!!!

a.jawad.s @ gmail.com

@Davide

Does it matter?

A) When routing a multicast packet for a multicast group, what are two effects of ip pim sparse-dense-mode on interface?

I think the correct is..

If RP is unknown -> dense mode rules

If RP is known -> sparse mode rules

According to (https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/15-2_2_e/multicast/configuration_guide/b_mc_1522e_3750x_3560x_cg/b_mc_3750x_3560x_chapter_010.html)

An interface configured in sparse-dense mode is treated in either sparse mode or dense mode of operation, depending on which mode the multicast group operates.
If a multicast group has a known RP, the interface is treated in sparse mode. If a group has no known RP, by default the interface is treated in dense mode and
data will be flooded over this interface.

Your view?

=====

Which command can you enter to configure a built-in-policer with minimum guaranteed bandwidth without starving other classes during periods of congestion?
A. priority percent
B. fair-queue
C. bandwidth
D. bandwidth remaining percent

I would say A.bandwidth has no build-in policer support according to table (https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-packet-marking/10100-priorityvsbw.html)

Your view?

====

Which two IS-IS commands can you enter to improve the convergence time? (Choose two)
A. fast-flood 7
B. isp-gen-interval 2 50 2000
C. timers throttle spf 5 1000 32000x
D. lsp-refresh-interval
E. max-lsa 13000

Your view?

====

What does Cisco Fog Computing provide to the IoT solution?
A. Provides scalability
B. It reduces latency and required bandwidth
C. Enables remote access to individual IoT components
D. Enable IaaS

D or B. I would say B based on (https://www.cisco.com/c/dam/en_us/solutions/trends/iot/docs/computing-overview.pdf)

Fog Computing 101
What Is It?
The fog extends the cloud to be closer to the things that produce and act on IoT data (Figure 2). These devices,
called fog nodes, can be deployed anywhere with a network connection: on a factory floor, on top of a power pole,
alongside a railway track, in a vehicle, or on an oil rig. Any device with computing, storage, and network
connectivity can be a fog node. Examples include industrial controllers, switches, routers, embedded servers, and
video surveillance cameras.
IDC estimates that the amount of data analyzed on devices that are physically close to the Internet of Things is
approaching 40 percent.1 There is good reason: analyzing IoT data close to where it is collected minimizes latency.
It offloads gigabytes of network traffic from the core network, and it keeps sensitive data inside the network.
Analyzing IoT data close to where it is collected minimizes latency. It offloads gigabytes of network traffic from the
core network. And it keeps sensitive data inside the network.
Figure 2. The Fog Extends the Cloud Closer to the Devices Producing Data

===

Which type of QoS is used on the CE device to rate-limit the aggregate traffic towards the WAN Ethernet circuit?
A. FIFO
B. CBWFQ
C. LLQ
D. WRED

Do you have a source to verify the correct?

====

What is the initial BFD state?
A. Up
B. Down
C. Init
D. AdminDown

I would say C. According to Cisco there are four main states for a BFD Session:
• Init: the initial state of a BFD session. No BFD packets have yet been received from the peer of the session.

• Up: a BFD Control packet with the “I Hear You” (IHY) bit set to 1 has been received.

• Failing: a transitional state from the UP state. Either the detection timer is in the process of expiring, or a BFD Control packet with the “I Hear You” bit set to 0 has been received.

• Down: a BFD Control packet with the “I Hear You” bit set to 0 has been received.

================

@Adam Wrzoskowicz

Congratulations!!!

Please share that PassLeader 400-101 dumps with 103q with me.

Daniel Pasono @ gmail com

Thanks in advance!!!

+1

@Adam Wrzoskowicz

Congratulations!!!

Please share that PassLeader 400-101 dumps with 103q with me.

Gabriele Caruso @ cox net

Thanks in advance!!!

+1

@GKK

A) agree

bandwidth or priority percent – I am not sure

fast-flood
lsp-refresh-interval

B. It reduces latency and required bandwidth

B. CBWFQ

C. Init

@irfan:

With PBR and set ip next-hop configured on an incoming interface, how does the router forward the packet with the next-hop being unreachable?
A. The next hop is added to the route table and the packet is policy routed
B. The packet is policy routed
C. The packet is dropped
D. The packet is forwarded using the normal routing table

I think this is D, since from Cisco website:
The set ip next-hop command verifies the existence of the next hop specified, and…

if the next hop exists in the routing table, then the command policy routes the packet to the next hop.

if the next hop does not exist in the routing table, the command uses the normal routing table to forward the packet.

Any other view?

@Ebrahem
can you please send me the latest dump Thanks

aboalba @ hotmail . com

@GKK

D. The packet is forwarded using the normal routing table

this is correct answer.

@Tim

Which two items must be defined to capture packet data with the Embedded Packet Capture feature? (Choose two)
A. The capture buffer/buffer size
B. The capture rate
C. The capture point
D. The capture file export location
E. The capture filter
F. The buffer memory size

I think A,C. To capture packet data, a capture buffer and a capture point need to be defined. The capture point should then be associated with the capture buffer. Enabling the capture point will start the process of capturing packet data.

==

Q4.

configure the primary route with both NH IP & egress interface. Agree? Should we use the egress interface so as to disable the route from RT when IF is down?

===

Avoid TCP Starvation/ UDP Dominance

D. WRED to balance TCP & UDP utilization.
How is this going to help since they both belong in same queue? I am not sure..

==

Which two statements about IPv4 and IPv6 networks are true? (Choose two.)
A. In IPv6, hosts perform fragmentation.
B. IPv6 uses a UDP checksum to verify packet integrity.
C. In IPv6, routers perform fragmentation.
D. In IPv4, fragmentation is performed by the source of the packet.
E. IPv4 uses an optional checksum at the transport layer.
F. IPv6 uses a required checksum at the network layer.
Answer: A, B

===

Which two statements about QoS marking are true? (Choose two)
A. The set-discard-class command can be configured for ATM and MPLS protocols
B. It can use a table map to mark traffic
C. It requires Cisco Express forwarding to be enabled on the sending interface and the receiving interface
D. It is supported on tunnel interfaces
E. It is supported on Fast EthernetChannel and ATM SVC interfaces
I think correct is A, D. A is verified from my side while I think C is wrong. Your view?

@Adam Wrzoskowicz

Congratulations!!!

Please share that PassLeader 400-101 dumps with 103q with me.

Nathanial Adams @ bluewin ch

Thanks in advance!!!

+1

+1

@GKK

I would said like this:

A. The capture buffer/buffer size
C. The capture point

==

Q4.

configure the primary route with both NH IP & egress interface.
Agree, other answers does not make sense.

===

Avoid TCP Starvation/ UDP Dominance

I would say: A) place UDP in a dedicated traffic class….

WRED is used in core network an only for TCP
==

Which two statements about IPv4 and IPv6 networks are true? (Choose two.)
A. In IPv6, hosts perform fragmentation.
B. IPv6 uses a UDP checksum to verify packet integrity.

===

Which two statements about QoS marking are true? (Choose two)
A. The set-discard-class command can be configured for ATM and MPLS protocols
D. It is supported on tunnel interfaces

@Ebrahem
Congratz..
Any one please share the dump Please please !!!
goforccie5 @ gmail.com
Thank you all

@ Anonymous & Tim
Type 4 LSA in OSPF: Flooded to an area or to a AS domain?

I would choose “area”.

Based on theory, LSAs-type4 generated by ABRs and flooded to an area, are re-generated by other ABRs so as to be flooded to other areas. Your view?

Which condition needs to be met for an eBGP neighborship to be established?
A. the AS numbers need to be the same
B. the BGP TTL security feature needs to be taken into account with regards to the number of hops on the path
C. reachability on TCP port 178 between both routers needs to be possible
D. reachability between the loopback ip addresses of both routers is required
Answer: B

I think Answer is C, but the BGP TCP port should be 179 not 178. (was this a mistake)?

@Tim @GKK thanks a lot for you imports it is really helping with my preparation.. Much appreciated
not forgetting @Ebrahem obviously