Share your CCIE v5 Written Experience

thank you asim farooqi for the dumps 130q. Are all questions correct? Are the dumps the latest?

thank you asim farooqi for the dumps 130q. Are all questions correct? Are the dumps the latest?

unfortunately,Cisco updated new ccie rs question
spoto just update 16 more questions which total questions is 156Q
http://cciers.spoto.net

spoto 140 is valid ,they update pass report on their website

I passed today, too. 90% of the questions was in Q311, 8 new question and 2 recycled.

DnD
CEF
IGMP
NSAP that I posted here yesterday

Q
Where is allocated the CEF
What happend with EEM script/applet when you restart the device
Some of IPV6
What you need to turn on MLD

Good luck all!!!

Don’t look for spoto that dumps we post here still working, check the Q311.

https://mega.nz/#!xNwGRQQC!L4wVfamMmNbNotbUo37x14eV_nJkQyGnjmJx4bg1hMg

@Shikima Congrats. It’s a great feeling isn’t it after you click next at question 100? 🙂

and relief!

Yes, it is. But now I gonna looking for the lab, so if anyone has material of LAB, please to me 😀
luis_sama@hotmail com

Here’s where I post some questions and answers
http://certcollection.org/forum/topic/282906-ccie-rs-400-101-written-exam-solutions-discussion/page__st__4984#entry1170230

hi, i review the forum and visit spoto website
i find that they updated rs dump includes 156 Q and new H2 + CFG
and i would purchase in a week.
someone offer some advice for it
the most efficet that they update the exam report everyday .
http://cciers.spoto.net/en/index.html#Latest

@CCIE

Yes, but there are 5 to 6 questions are new…I gt 3 new questions…It depends….different students hv dfrnt no.of new questions…but passleader is enf to pass & Check new Updates of passleader…..there are some changes in every updates according CISCO EXAM…
Best way you can buy passleader to check update….I think new updated version arrive…

Hello… help with a question that the answer seems wrong in the NOSH VCE:

When you deploy DMVPN, what is the purpose of the command ‘crypto isakmp key ciscotest address 0.0.0.0 0.0.0.0?

The answer in the VCE says it is configured on the hub to set the pre-shared key for the spoke routers….

however, this command would also be configured on the spoke routers, so I believe that the answer should be, it is configured on hub and spoke routers to establish peering.

Which one is correct? Thanks for the assistance here.

@robby
on the spokes you do not want to configure the ipsec peer with 0.0.0.0 0.0.0.0 – this allows any peer. On the spokes you always have just 1 or 2 hubs, so this is useful only on hubs, so you do not need to configure hundreds of spoke peers separately.

Congrats Shikima. Are the answers in 311Q dumps correct or not?

What is the correct answer for below question guys?

When You implement the Eigrp add-paths feature, which configuration can cause routing issues on DMVPN circuit?

enabling next-hop-self under the EIGRP
disabling the default variance under the EIGRP process

Which one is correct?

i am going to purchase the new dumps of CCIE 400-101 from 521 labs.
if any one interested to participate in sharing
please provide me their email and what app number. he will give me in 250 $.
my email is haseebrehman135 @ yahoo . com

To pass any CISCO exam (proxy exam)
100% guarantee to pass exam

contect on ciscoproxyexam at gmail com

Are the answers in 311Q dumps correct or not?

site is down I guess Cisco shutdown this site – certcollection.org

Passed my exams today. No nasty surprises..All questions came from Shikima’s PL325 link. Thanks for your help guys and good luck for your exams.

Good day We are 591LAB Int’l locally in China known as “SPOTO”. We have valid RS Written review materials. In addition, our CCIE RS LAB pass rate at the moment is 96%. Please reach us on our webpage
http://www.591lab.com/
http://www.591lab.com/591lab-blog
Thanks for attention!

Hi Guys, what doe you think, PL325 has the answer for this questions as :

https://www.dropbox.com/s/0r3rz21ms9bu8fc/Screenshot%202017-05-23%2020.41.32.png?dl=0

BUt 311Q has it different

@tr in the 311Q are almost everything corrected and posted here the questions that are wrong 🙂

Passed the test as well. Shikima did the trick as well for me. Didn’t get the NSAP question though and only 3 or 4 DnD but did get the Q above from Robby. Only 2 new questions about SNMPv3. Thank you all!!

Gratz!!! I headed for CCIE Lab, if you have anything that can you share with me, I will grateful

I have found approx. 20 question in q325 which have different answers than q311. So Should we trust which dump..

Trust Cisco Docs…..

hi

hi

http://cciers.spoto.net

spoto pass 3 written and 2 lab yesterday
http://cciers.spoto.net

network-specific stateful NAT64 prefix: IPV6 prefix assigned by an orginzation
NAT64 : supports application layer gateway
NPTv6 : translates 2001:1::/64 to 2001:2::/64
well-known stateful NAT64 prefix: supports IPV6 prefix 64:ff9b::/96

Hi Dudes… I saw a nice all in one Cheat Sheet! I think it can be useful for network engineers who need to do multivendor configuration…Cisco etc..

http://ipcisco.com/comparison-of-top-four-vendorss-command-line/

Hi Guys,

I am sorry I haven’t updated you guys yet. I passed last week with 9** score. The question is same only you need to get the correct answers. Thanks for the help of you guys who validated my research. Answers can be found from Cisco docs.

@CCIERS it’s disabling the default variance. It is highly recommended not to do any changes on the variance when implementing EIGRP add-path feature or else you will be messing with the routing of DMVPN ckt.

Hi Guys,

I have a confusing question about Type 4 LSA.
LSA Type 4 is generated by ABR, and how I understand it, it’s flooded throug an area. In dumps, the correct answer is that it’s flooded throug an AS.
In situations where we have topology like this:

—ASBR—R1–ABR1–R2—ABR2—R3—-

ABR1 generate LSA4 and flood it to the R2 and ABR2. When ABR2 receive it, he will re-generate LSA4 and flood it to R3. When you look on R3 show ip ospf database, you see that LSA4 have ADV router from RID ABR2, not ABR1.

So if I understand it Type 4 LSA is flooded throug an area, not throug all AS.

Am I wrong or what?

I understand that all routers will have LSA4 in whole AS, but its not received from only one ABR. Every ABR flooded it to it’s own area.

Help.

Thanks.

doest ccie written has lab SIMS?

i need the latest dumps , I am sitting on exam next sunday, fenfinolhu @ icloud . com

@test

I dont think CCIE written has SIM, Can anybody confirm it please

to gasf i am going to purchase the dumps from 591lab website.

can you share with me. it will cost me 250$.

if you are interested please send me email on haseebrehman135 @ yahoo .com

it cost 99 dollars only, buy yourself

@Mark32
you are correct . LSA4 will flood through the area not through the AS.
Here we have to take the stub areas into consideration.

@shikima,

can u send me the dumps please,

fenfinolhu @ icloud . com

@CCIE,

How could you enable extended metric feature ????

I think the answer is New style TLV only.

Anyone know if certcollection.org is down? Not able to access it over the past day

could anyone please share 140 questions for the exam.
need it quite urgent. {email not allowed}

@alibaba yeah the site is down since yesterday

Hello All,

I have passed the exam with 9xx. I have just studied on q311 and q325. They are valid and over %90 questions come from this dumps.
However please ensure about the answers. Because of that some of them are not correct.

Please be carefull..

There is someone who is Preparing for the ccie lab and writers would you like to discuss some topics? Write me {email not allowed}.

jos_mar_87 @ hotmail. com